Радиолоцман Электроника en
расширенный поиск +
  

Texas Instruments TMS320R2812GHHS

Производитель:Texas Instruments
Серия:TMS320R2812
Модель:TMS320R2812GHHS

32-Bit Digital Signal Controller with RAM 179-BGA MICROSTAR -40 to 125

Документы:

  • Скачать » Datasheet
  • Скачать » Application Notes, PDF, 5.5 Мб, 11-10-2007
    TMS320F281x Boot ROM Serial Flash Programming
    This application report describes the implementation of TI's Flash application program interface (API), the software interface to TI's Flash algorithms. Understanding the fundamentals of the Flash API documentation prior to using this application report is important. This document does not replace the Flash API documentation; instead, it guides you among several sets of TI documentation with the F
  • Скачать » Application Notes, PDF, 428 Кб, 15-08-2003
    Signal Conditioning an LVDT Using a TMS320F2812 DSP
    A linear variable differential transformer (LVDT) is a type of electro-mechanical transducer capable of measuring linear displacement with a high degree of accuracy. The transducer requires external electronic circuitry to produce a stable reference oscillator, and condition the return signal in order to determine displacement. Traditional LVDT circuits are based on analog design techniques, and s
  • Скачать » Application Notes, PDF, 531 Кб, Rev. A, 17-04-2003
    Programming Examples for the TMS320F281x eCAN (Rev. A)
    The TMS320F28x (TMS320F2812 and TMS320F2810) series of digital signal processor (DSP) controllers feature an on-chip enhanced Controller Area Network (eCAN) module. This module is a full-CAN controller, compliant with CAN specification 2.0B. This application report contains several programming examples to illustrate how the eCAN module is set up for different modes of operation. The objective is
  • Скачать » Application Notes, PDF, 574 Кб, 28-01-2005
    DSP Control of Electro-Hydraulic Servo Actuators
    Hydraulic actuators are characterized by their ability to impart large forces at high speeds and are used in many industrial motion systems. In applications where good dynamic performance is important it is common to contain the actuator in a servo loop comprising a feedback transducer and electronic controller. The majority of electronic servo-controllers used in these systems are analogue based
  • Скачать » Application Notes, PDF, 703 Кб, 16-06-2006
    Spread-Frequency Shift Keying Power Line Modem Software Architecture
    This application report describes the software architecture and design of the Spread-Frequency Shift Keying Power Line Modem demonstration platform. Each demonstration unit consists of an eZdsp DSP developer's board plus a daughter card. The daughter card contains electronics that shape and amplify the power line communications (PLC) transmit signal, filter the PLC receive signal, handle RS-232 se
  • Скачать » Application Notes, PDF, 112 Кб, 01-01-1997
    DSP Solutions for the Switched Reluctance Motor
    This document deals with solutions to control a switched reluctance motor using the TMS320C24x. This new DSP family enables cost-effective design of intelligent controllers for switched reluctance motors. Two speed control algorithms are presented, they allow the Switched Reluctance motor drive to reach high efficiency, smooth operation, very good dynamic behavior, very high speed and low acoustic
  • Скачать » Application Notes, PDF, 246 Кб, 30-10-1999
    A Variable-Speed Sensorless Drive System for Switched Reluctance Motors
    With the advent of high-speed digital signal processors (DSPs) specialized for motion control applications, it has become possible to control motors without mechanical (speed or position) sensors. This is achieved by algorithms that estimate the desired quantities in real time, based on the electrical signals in the motor windings. Benefits include cost savings and improved reliability due to redu
  • Скачать » Application Notes, PDF, 365 Кб, 15-03-2007
    Optimizing Digital Motor Control Libraries
    The DMC library contains a collection of component modules and system implementations, which are intended for evaluation, accelerated design, and development of motor control firmware.The software is intended to meet these goals, and no optimization is performed.As system designers implement systems, they must optimize their systems for performance in terms of memory consumption and CPU cyc
  • Скачать » Application Notes, PDF, 28 Кб, 31-01-2005
    Recommended Power Solutions for the TMS320x2810/1/2 DSPs
    This application report provides a table to assist users in selecting the best power solution for their specific TMS320281x application.
  • Скачать » Application Notes, PDF, 117 Кб, 11-07-2002
    Migrating Code Composer v4.12 Projects to Code Composer Studio v2.0
    This application report describes the process of migrating an existing Code Composer v4.12 project to a Code Composer Studio? Integrated Development Environment (IDE) v2 project.
  • Скачать » Application Notes, PDF, 124 Кб, Rev. A, 05-10-2006
    TMS320x281x to TMS320x280x/2801x/2804x Migration Overview (Rev. A)
    This application report describes differences between the Texas Instruments TMS320x281x and TMS320x280x/2801x/2804x DSPs to assist in application migration from the 281x to the 280x. While the main focus of this document is migration from 281x to 280x/2801x/2804x, users considering migrating in the reverse direction (280x to 281x) will also find this document useful. Functions that are identical
  • Скачать » Application Notes, PDF, 1.3 Мб, 26-07-2007
    Interfacing SD/MMC Cards With TMS320F28xxx DSCs
    This application report and associated code implements the interfacing of Secure Digital (SD) or Multi-Media Card (MMC) types of Flash memory cards with the TMS320F28xxx digital signal controllers (DSCs). These cards can use serial peripheral interface (SPI) or parallel (SD) interface to connect to the host. This application report demonstrates the SPI mode and includes the schematics showing th
  • Скачать » Application Notes, PDF, 62 Кб, 18-09-2007
    Custom Bootloader Options via One-Time Programmable (OTP) Memory
    The Boot to One-Time-Programmable (OTP) memory mode in the TMS320x280x devices provides the necessary hooks to support custom bootloaders. This is very useful in a situation where a bootloader option, required by a specific customer application, is not already supported as one of the built-in options in the Boot read-only memory (ROM). This application report includes information and examples on h
  • Скачать » Application Notes, PDF, 655 Кб, Rev. A, 14-05-2008
    An Overview of Designing Analog Interface With TM320F28xx/28xxx DSCs (Rev. A)
    This application report provides guidelines that take you through everything from configuring the ADC and related registers correctly, responding to interrupts, and board design recommendations; this may be particularly useful for first-time users of the TMS320C2000в„ў digital signal processor (DSP) platform devices and for firmware engineers with less exposure to the analog world. Various s
  • Скачать » Application Notes, PDF, 185 Кб, 30-10-2001
    An Easy Way of Creating a C-callable Assembly Function for the TMS320C28x DSP
    C-callable assembly routines require an understanding of parameter-passing conventions and environments expected by the C compiler. This application report provides instructions and suggestions to configure the C compiler to assist with these issues.
  • Скачать » Application Notes, PDF, 407 Кб, 02-05-2003
    Online Stack Overflow Detection on the TMS320C28x DSP
    A stack overflow in an embedded DSP application generally produces a catastrophic software crash due to data corruption, lost return addresses, or both. Traditional off-line approaches to sizing a stack during development, such as filling with a know value, or estimating based on code content, are not 100% reliable. Therefore, programmers often feel compelled to reserve larger stack sizes than are
  • Скачать » Application Notes, PDF, 530 Кб, Rev. D, 27-02-2013
    Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. D)
    This application report explores a hardware abstraction layer implementation to make C/C++ coding easier on C28x devices. This method is compared to traditional #define macros and topics of code efficiency and special case registers are also addressed.
  • Скачать » Application Notes, PDF, 423 Кб, 19-08-2008
    Flash Programming Solutions for the TMS320F28xxx DSCs
    Flash programming is a process that occurs during all stages of a TMS320F28xxx digital signal controller (DSC) development cycle: firmware debug, prototyping, production, and field reprogramming. Several solutions are available to accommodate programming for all of these development stages. This application report presents solutions that are available and at what stage in the development cycle the
  • Скачать » Application Notes, PDF, 2.0 Мб, 16-11-2009
    Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices
    The C28xxx generation of microcontrollers can connect to external nonvolatile memory through a variety of interfaces including parallel, serial peripheral interface (SPI), and inter-integrated circuit (I2C). This application report discusses how to write drivers for your external nonvolatile memory to allow for in-place programming using SDFlash, an application provided by Spectrum Digital, Inc. A
  • Скачать » Application Notes, PDF, 125 Кб, 15-04-2009
    Common Object File Format (COFF)

На английском языке: Datasheet Texas Instruments TMS320R2812GHHS

    ПоставщикПроизводительЦена
    ЭлитанTexas Instruments2 660 руб.
    ДКО ЭлектронщикTexas Instrumentsпо запросу
    Кремнийпо запросу
    Подробнее об условиях поставки »

Статус продуктаВ производстве (Рекомендуется для новых разработок)
RoHSTBD
Бессвинцовая технология (Pb Free)Нет
Доступность образцов у производителяНет

Параметры:

ADC (Ch)16
Additional FeaturesExternal Interface (XINTF)
Single Zone Code Security
32-bit CPU Timers
Watchdog Timer
2-pin Oscillator
AEC-Q100 Automotive Qual
Analog to Digital Converter (ADC)ADC12: 2-S/H
12.5-MSPS
Approx. Price (US$)10.65 | 1ku
CAP6
CPUC28x
Frequency(MHz)150
GPIO56
Operating Temperature Range(C)-40 to 125
-40 to 85
Other Actuation FeaturesN/A
Other Connectivity FeaturesMcBSP
CAN
Other Sensing FeaturesN/A
PWM Technology TypeEV
PWM(Ch)16
Package GroupBGA MICROSTAR
Package Size: mm2:W x L (PKG)179BGA MICROSTAR: 144 mm2: 12 x 12(BGA MICROSTAR)
Processing AcceleratorsN/A
QEP2
RAM(KB)40
RatingCatalog
SPI1
Total Processing (MIPS)150
UART2

Корпус / Упаковка / Маркировка:

Pin179179
Package TypeGHHGHH
Industry STD TermBGA MICROSTARBGA MICROSTAR
JEDEC CodeS-PBGA-NS-PBGA-N
Package QTY160160
Device MarkingTMS320R2812GHHS
Width (мм)1212
Length (мм)1212
Thickness (мм).9.9
Pitch (мм).8.8
Max Height (мм)1.41.4
Mechanical DataСкачать »Скачать »

Классификация производителя:

Semiconductors > Microcontrollers (MCU) > Performance MCUs > Real-time Control > Fixed-point F280x/1x

Комплекты разработчика и оценочные наборы:

  • JTAG Emulators/ Analyzers: C2000-GANG
    C2000 Gang Programmer
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
    XDS100v2 JTAG Debug Probe (20-pin cTI version)
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
    XDS100v2 JTAG Debug Probe (14-pin TI version)
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU200-U
    XDS200 USB Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
    XDS560v2 System Trace USB & Ethernet Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
    XDS560v2 System Trace USB Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
Срезы ↓
радиолоцман вконтакте радиолоцман одноклассники радиолоцман facebook радиолоцман twitter радиолоцман google плюс