Радиолоцман Электроника en
расширенный поиск +
  

Texas Instruments TMS320F28235ZHHA

Производитель:Texas Instruments
Серия:TMS320F28235
Модель:TMS320F28235ZHHA

Digital Signal Controller 179-BGA MICROSTAR -40 to 85

Документы:

  • Скачать » Datasheet
  • Скачать » Application Notes, PDF, 229 Кб, Rev. B, 08-06-2009
    TMS320x281x to TMS320x2833x or 2823x Migration Overview (Rev. B)
    This application report describes differences between the Texas Instruments TMS320x281x and the TMS320x2833x and TMS320x2823x device families to assist in application migration. While the main focus of this document is migration from 281x to 2833x/2823x, you will also find this document useful if you are considering migrating in the reverse direction. Functions that are identical in both devices a
  • Скачать » Application Notes, PDF, 112 Кб, 03-03-2009
    TMS320x2833x/2823x to TMS320x2834x Delfino Migration Overview
    This application report describes differences between the Texas Instruments TMS320x2833x/2823x and the TMS320x2834x Delfinoв„ў devices to assist in application migration. While the main focus of this document is migration from TMS320x2833x/2823x to TMS320x2834x, you will also find this document useful if you are considering migrating in the reverse direction. Functions that are identical in both de
  • Скачать » Application Notes, PDF, 179 Кб, 30-11-2006
    Using the eQEP Module in TMS320x280x as a Dedicated Capture
    This document provides a guide for the use of the eQEP module as a dedicated capture unit and is applicable to the TMS320x280x, 28xxx family of processors.
  • Скачать » Application Notes, PDF, 910 Кб, 04-08-2008
    Interfacing the TMS320F2833x to the AIC23B Stereo Audio Codec
    This application report describes the implementation of an audio application using the TLV320AIC23B stereo audio codec interfaced to the TMS320F28335 digital signal controller and the setup of the multi-channel buffered serial port (McBSP) and direct memory access (DMA) module to support the application.
  • Скачать » Application Notes, PDF, 311 Кб, Rev. C, 10-06-2015
    Hardware Design Guidelines for TMS320F28xx and TMS320F28xxx DSCs (Rev. C)
    TMS320F28xx and F28xxx digital signal controllers (DSCs) include multiple complex peripherals running at fairly high-clock frequencies. They are commonly connected to low level analog signals using an onboard analog-to-digital converter (ADC). This application report is organized as a guide for system level hardware design, parts selection, and schematics design to board layout and helps in avoidi
  • Скачать » Application Notes, PDF, 218 Кб, Rev. A, 06-03-2007
    TMS320280x and TMS320F2801x ADC Calibration (Rev. A)
    This application report describes a method for improving the absolute accuracy of the 12-bit ADC found on the TMS320280x and TMS3202801x devices. Inherent gain and offset errors affect the absolute accuracy of the ADC. The methods described in this report can improve the absolute accuracy of the ADC to levels better than 0.5%.This application report has an option to download an example program
  • Скачать » Application Notes, PDF, 99 Кб, Rev. B, 01-07-2009
    TMS320x280x to TMS320x2833x or 2823x Migration Overview (Rev. B)
    This application report describes differences between the Texas Instruments TMS320x280x/2801x/2804x and TMS320x2833x/2823x microcontrollers to assist in application migration. While the main focus of this document is migration from 280x/2801x/2804x to 2833x/2823x, you will also find this document useful if you are considering migrating in the reverse direction. Functions that are identical in both
  • Скачать » Application Notes, PDF, 521 Кб, 11-11-2014
    Calculating Useful Lifetimes of Embedded Processors
    This application report provides a methodology for calculating the useful lifetime of TI embedded processors (EP) under power when used in electronic systems. It is aimed at general engineers who wish to determine if the reliability of the TI EP meets the end system reliability requirement.
  • Скачать » Application Notes, PDF, 124 Кб, Rev. A, 05-10-2006
    TMS320x281x to TMS320x280x/2801x/2804x Migration Overview (Rev. A)
    This application report describes differences between the Texas Instruments TMS320x281x and TMS320x280x/2801x/2804x DSPs to assist in application migration from the 281x to the 280x. While the main focus of this document is migration from 281x to 280x/2801x/2804x, users considering migrating in the reverse direction (280x to 281x) will also find this document useful. Functions that are identical
  • Скачать » Application Notes, PDF, 511 Кб, 26-05-2006
    TMS320F280x DSC USB Connectivity Using TUSB3410 USB-to-UART Bridge Chip
    USB connectivity on the TMS320F280xв„ў family of Digital Signal Controllers may be achieved using the TUSB3410 USB 2.0 to UART bridge chip. All needed USB descriptors and firmware for the TUSB3410 device are bootable from the on-chip memory of the TMS320F280x device through the I2C port, and hence an external EEPROM is not needed in the system. A USB development system for the TMS320F2808 is e
  • Скачать » Application Notes, PDF, 123 Кб, 20-12-2006
    Using Enhanced Pulse Width Modulator (ePWM) Module for 0-100% Duty Cycle Control
    This document provides a guide for the use of the ePWM module to provide 0% to 100% duty cycle control and is applicable to the TMS320x280x family of processors.
  • Скачать » Application Notes, PDF, 381 Кб, Rev. A, 09-09-2008
    Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A)
    This application report presents a method for utilizing the on-chip pulse width modulated (PWM) signal generators on the TMS320F280xв„ў family of digital signal controllers as a digital-to-analog converter (DAC). The method involves analog low-pass filtering the PWM signal to remove high frequency components, leaving only the low-frequency content. Theoretical and experimental results are presented
  • Скачать » Application Notes, PDF, 641 Кб, Rev. L, 28-02-2013
    Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L)
    Several special requirements exist for running an application from on-chip Flash memory on the TMS320F28xxx. These requirements generally do not manifest themselves during code development in RAM since the Code Composer Studioв„ў (CCS) debugger can mask problems associated with initialized sections and their linkage in memory. This application report covers the application software modificatio
  • Скачать » Application Notes, PDF, 342 Кб, 31-03-2008
    Copying Compiler Sections from Flash to RAM on the TMS320F28xxx DSCs
    This application report and associated code files provide functionality for copying initialized compiler sections from the internal Flash memory to the internal random access memory (RAM) of the TMS320F28xxx digital signal controllers (DSCs) at run time for optimizing execution speed. The solution provided implements this functionality directly after booting before entering the c_int00 C entry rou
  • Скачать » Application Notes, PDF, 240 Кб, Rev. A, 25-10-2007
    Getting Started With TMS320C28x Digital Signal Controllers (Rev. A)
    This guide is organized by development flow and functional areas to make your design effort as seamless as possible. Tips on getting started with TMS320C28xв„ў DSP software and hardware development are provided to aid in your initial design and debug efforts. Each section includes pointers to valuable information including technical documentation, software, and tools for use in each phase of d
  • Скачать » Application Notes, PDF, 185 Кб, 30-10-2001
    An Easy Way of Creating a C-callable Assembly Function for the TMS320C28x DSP
    C-callable assembly routines require an understanding of parameter-passing conventions and environments expected by the C compiler. This application report provides instructions and suggestions to configure the C compiler to assist with these issues.
  • Скачать » Application Notes, PDF, 407 Кб, 02-05-2003
    Online Stack Overflow Detection on the TMS320C28x DSP
    A stack overflow in an embedded DSP application generally produces a catastrophic software crash due to data corruption, lost return addresses, or both. Traditional off-line approaches to sizing a stack during development, such as filling with a know value, or estimating based on code content, are not 100% reliable. Therefore, programmers often feel compelled to reserve larger stack sizes than are
  • Скачать » Application Notes, PDF, 530 Кб, Rev. D, 27-02-2013
    Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. D)
    This application report explores a hardware abstraction layer implementation to make C/C++ coding easier on C28x devices. This method is compared to traditional #define macros and topics of code efficiency and special case registers are also addressed.
  • Скачать » Application Notes, PDF, 423 Кб, 19-08-2008
    Flash Programming Solutions for the TMS320F28xxx DSCs
    Flash programming is a process that occurs during all stages of a TMS320F28xxx digital signal controller (DSC) development cycle: firmware debug, prototyping, production, and field reprogramming. Several solutions are available to accommodate programming for all of these development stages. This application report presents solutions that are available and at what stage in the development cycle the
  • Скачать » Application Notes, PDF, 407 Кб, 21-09-2009
    EEPROM Emulation With the TMS320F28xxx DSCs
    Many applications require storing small quantities of system related data (e.g., calibration values, device configuration) in a non-volatile memory, so that it can be used or modified and reused even after power cycling the system. EEPROMs are primarily used for this purpose. EEPROMs have the ability to erase and write individual bytes of memory many times over and the programmed locations retain
  • Скачать » Application Notes, PDF, 37 Кб, 22-03-2016
    Calculator for CAN Bit Timing Parameters
    Controller Area Network (CAN) nodes use user-specified timing parameters to sample the asynchronous bitstream and recover the clock. These parameters are typically based on the frequency of the available reference oscillator. There may be several options available for a given frequency, and some of them will allow a looser oscillator tolerance than others. This application report details the creat
  • Скачать » Application Notes, PDF, 2.0 Мб, 16-11-2009
    Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices
    The C28xxx generation of microcontrollers can connect to external nonvolatile memory through a variety of interfaces including parallel, serial peripheral interface (SPI), and inter-integrated circuit (I2C). This application report discusses how to write drivers for your external nonvolatile memory to allow for in-place programming using SDFlash, an application provided by Spectrum Digital, Inc. A
  • Скачать » Application Notes, PDF, 129 Кб, 17-01-2012
    TPS75005 Quick-Start Guide with C2000в„ў Controllers
    The TPS75005 is a complete power management solution for C2000 controllers from Texas Instruments. This document illustrates how to attach the TPS75005 to a C2000 controller.
  • Скачать » Application Notes, PDF, 125 Кб, 15-04-2009
    Common Object File Format (COFF)
  • Скачать » Application Notes, PDF, 905 Кб, Rev. G, 26-01-2011
    PowerPADв„ў Thermally Enhanced Package (Rev. G)

На английском языке: Datasheet Texas Instruments TMS320F28235ZHHA

    IC MCU 32BIT 512KB FLASH 179BGA
    Цены на TMS320F28235ZHHA
    ПоставщикПроизводительЦена
    ЭлитанTexas Instruments3 287 руб.
    ДКО ЭлектронщикTexas Instrumentsпо запросу
    Кремнийпо запросу
    ЭлектроПластTexas Instrumentsпо запросу
    Подробнее об условиях поставки »

Статус продуктаВ производстве (Рекомендуется для новых разработок)
RoHSСовместим
Бессвинцовая технология (Pb Free)Да
Доступность образцов у производителяНет

Параметры:

ADC (Ch)16
Additional FeaturesExternal Interface (XINTF)
Single Zone Code Security
32-bit CPU Timers
Watchdog Timer
2-pin Oscillator
AEC-Q100 Automotive Qual
Analog to Digital Converter (ADC)ADC12: 2-S/H
12.5-MSPS
Approx. Price (US$)13.82 | 1ku
CAP6
CPUC28x
Flash(KB)512
Frequency(MHz)150
GPIO88
High Resolution PWM(Ch)6
I2C1
Operating Temperature Range(C)-40 to 125
-40 to 85
Other Actuation FeaturesN/A
Other Connectivity FeaturesMcBSP
CAN
Other Sensing FeaturesN/A
PWM Technology TypeType 0
PWM(Ch)12
Package GroupBGA MICROSTAR
Package Size: mm2:W x L (PKG)179BGA MICROSTAR: 144 mm2: 12 x 12(BGA MICROSTAR)
Processing AcceleratorsDMA
QEP2
RAM(KB)68
RatingCatalog
SPI1
Total Processing (MIPS)150
UART3

Корпус / Упаковка / Маркировка:

Pin179179
Package TypeZHHZHH
Industry STD TermBGA MICROSTARBGA MICROSTAR
JEDEC CodeS-PBGA-NS-PBGA-N
Package QTY160160
Device MarkingF28235ZHHATMS320
Width (мм)1212
Length (мм)1212
Thickness (мм).9.9
Pitch (мм).8.8
Max Height (мм)1.41.4
Mechanical DataСкачать »Скачать »

Классификация производителя:

Semiconductors > Microcontrollers (MCU) > Performance MCUs > Real-time Control > Fixed-point F280x/1x

Комплекты разработчика и оценочные наборы:

  • Development Kits: TMDSDOCK28335
    TMS320F28335 Experimenter Kit
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • Evaluation Modules & Boards: TMDSDC3359
    Data Concentrator Evaluation Module
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • Evaluation Modules & Boards: TMDSDCDC8KIT
    C2000 DC/DC Developer's Kit
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: C2000-GANG
    C2000 Gang Programmer
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
    XDS100v2 JTAG Debug Probe (20-pin cTI version)
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
    XDS100v2 JTAG Debug Probe (14-pin TI version)
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU200-U
    XDS200 USB Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
    XDS560v2 System Trace USB & Ethernet Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
    XDS560v2 System Trace USB Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
Срезы ↓
радиолоцман вконтакте радиолоцман одноклассники радиолоцман facebook радиолоцман twitter радиолоцман google плюс