Радиолоцман Электроника en
расширенный поиск +
  

Texas Instruments TMS320F2806PZQ

Производитель:Texas Instruments
Серия:TMS320F2806
Модель:TMS320F2806PZQ

32-Bit Digital Signal Controller with Flash 100-LQFP -40 to 125

Документы:

  • Скачать » Datasheet
  • Скачать » Application Notes, PDF, 574 Кб, 28-01-2005
    DSP Control of Electro-Hydraulic Servo Actuators
    Hydraulic actuators are characterized by their ability to impart large forces at high speeds and are used in many industrial motion systems. In applications where good dynamic performance is important it is common to contain the actuator in a servo loop comprising a feedback transducer and electronic controller. The majority of electronic servo-controllers used in these systems are analogue based
  • Скачать » Application Notes, PDF, 495 Кб, 29-06-2007
    Configuring the TMS320F280x DSP as an I2C Processor
    This application report provides details on how to configure a TMS320F280x device so that it can be used as an I2C slave processor and the protocol used to support that configuration.
  • Скачать » Application Notes, PDF, 1.7 Мб, 02-05-2008
    Microstepping Bipolar Drive of Two-Phase Hybrid Stepping Motor on F2808 DSP
    This application report describes the implementation of a micro-stepping algorithm for a two-phase stepper motor using the TMS320F2808 digital signal controller (DSC). The "C" code can easily be utilized with other members of the C2000в„ў DSC platform of devices.
  • Скачать » Application Notes, PDF, 125 Кб, Rev. A, 10-04-2008
    TMS320F28xx and TMS320F28xxx DSP Power Reference Design (Rev. A)
    This reference design takes into account the voltage, current, and start-up requirements of the TMS320F280x Digital Signal Processor (DSP) families. The operating input voltage ranges from 3.4 V to 6 V. This design is a high-efficiency solution that provides two voltage rails (1.8-V core supply and 3.3-V I/O supply) and an active-low reset signal to the DSP. This design can be easily adapted to fi
  • Скачать » Application Notes, PDF, 437 Кб, 05-05-2006
    TMS320C2000в„ў DSP Controllers: A Perfect Fit for Solar Power Inverters
    A worldwide concern for future access to affordable, sustainable energy is driving the development of more efficient solar power generation. In any photovoltaic (PV) based system, the inverter is a critical component responsible for the control of electricity flow between the module, battery, loads, and power grid. Inverters, which convert direct to alternating current, can be designed to be used
  • Скачать » Application Notes, PDF, 703 Кб, 16-06-2006
    Spread-Frequency Shift Keying Power Line Modem Software Architecture
    This application report describes the software architecture and design of the Spread-Frequency Shift Keying Power Line Modem demonstration platform. Each demonstration unit consists of an eZdsp DSP developer's board plus a daughter card. The daughter card contains electronics that shape and amplify the power line communications (PLC) transmit signal, filter the PLC receive signal, handle RS-232 se
  • Скачать » Application Notes, PDF, 499 Кб, 06-09-2000
    A Software Modularity Strategy for Digital Control Systems
  • Скачать » Application Notes, PDF, 57 Кб, 07-04-2003
    Code Composer Studioв„ў IDE v2.2 Profiler
    This application note will outline and discuss the Code Composer Studio Profiler and how to use it in accurately profiling an application. We will explain the various types of profiling and will detail the differences between simulator profiling and emulator profiling.Requirements:Windows 98 (SP1/SE), Windows NT SP6, Windows 2000 (SP1/SP2), Windows XP Home and ProCode Co
  • Скачать » Application Notes, PDF, 112 Кб, 01-01-1997
    DSP Solutions for the Switched Reluctance Motor
    This document deals with solutions to control a switched reluctance motor using the TMS320C24x. This new DSP family enables cost-effective design of intelligent controllers for switched reluctance motors. Two speed control algorithms are presented, they allow the Switched Reluctance motor drive to reach high efficiency, smooth operation, very good dynamic behavior, very high speed and low acoustic
  • Скачать » Application Notes, PDF, 246 Кб, 30-10-1999
    A Variable-Speed Sensorless Drive System for Switched Reluctance Motors
    With the advent of high-speed digital signal processors (DSPs) specialized for motion control applications, it has become possible to control motors without mechanical (speed or position) sensors. This is achieved by algorithms that estimate the desired quantities in real time, based on the electrical signals in the motor windings. Benefits include cost savings and improved reliability due to redu
  • Скачать » Application Notes, PDF, 99 Кб, Rev. B, 01-07-2009
    TMS320x280x to TMS320x2833x or 2823x Migration Overview (Rev. B)
    This application report describes differences between the Texas Instruments TMS320x280x/2801x/2804x and TMS320x2833x/2823x microcontrollers to assist in application migration. While the main focus of this document is migration from 280x/2801x/2804x to 2833x/2823x, you will also find this document useful if you are considering migrating in the reverse direction. Functions that are identical in both
  • Скачать » Application Notes, PDF, 138 Кб, 29-04-1999
    3.3 V DSP for Digital Motor Control
    New generations of motor control digital signal processors (DSPs) lower their supply voltages from 5V to 3.3V to offer higher performance at lower cost. Replacing traditional 5V digital control circuitry by 3.3V designs introduce no additional system cost and no significant complication in interfacing with TTL and CMOS compatible components, as well as with mixed voltage ICs such as power transist
  • Скачать » Application Notes, PDF, 365 Кб, 15-03-2007
    Optimizing Digital Motor Control Libraries
    The DMC library contains a collection of component modules and system implementations, which are intended for evaluation, accelerated design, and development of motor control firmware.The software is intended to meet these goals, and no optimization is performed.As system designers implement systems, they must optimize their systems for performance in terms of memory consumption and CPU cyc
  • Скачать » Application Notes, PDF, 117 Кб, 11-07-2002
    Migrating Code Composer v4.12 Projects to Code Composer Studio v2.0
    This application report describes the process of migrating an existing Code Composer v4.12 project to a Code Composer Studio? Integrated Development Environment (IDE) v2 project.
  • Скачать » Application Notes, PDF, 124 Кб, Rev. A, 05-10-2006
    TMS320x281x to TMS320x280x/2801x/2804x Migration Overview (Rev. A)
    This application report describes differences between the Texas Instruments TMS320x281x and TMS320x280x/2801x/2804x DSPs to assist in application migration from the 281x to the 280x. While the main focus of this document is migration from 281x to 280x/2801x/2804x, users considering migrating in the reverse direction (280x to 281x) will also find this document useful. Functions that are identical
  • Скачать » Application Notes, PDF, 33 Кб, 29-06-2015
    Using the CAN Piccolo Bootloader at High Temperature
    The Controller Area Network (CAN) protocol requires strict tolerances from reference bit clocks, which are generally met using quartz crystal oscillators or ceramic resonators. The TMS320F2803x, TMS320F2805x, and TMS320F2806x microcontrollers use an on-chip zero-pin oscillator with no external components as a reference clock for the CAN bootloader. This oscillator's tolerance is sufficient at room
  • Скачать » Application Notes, PDF, 511 Кб, 26-05-2006
    TMS320F280x DSC USB Connectivity Using TUSB3410 USB-to-UART Bridge Chip
    USB connectivity on the TMS320F280xв„ў family of Digital Signal Controllers may be achieved using the TUSB3410 USB 2.0 to UART bridge chip. All needed USB descriptors and firmware for the TUSB3410 device are bootable from the on-chip memory of the TMS320F280x device through the I2C port, and hence an external EEPROM is not needed in the system. A USB development system for the TMS320F2808 is e
  • Скачать » Application Notes, PDF, 123 Кб, 20-12-2006
    Using Enhanced Pulse Width Modulator (ePWM) Module for 0-100% Duty Cycle Control
    This document provides a guide for the use of the ePWM module to provide 0% to 100% duty cycle control and is applicable to the TMS320x280x family of processors.
  • Скачать » Application Notes, PDF, 1.7 Мб, 07-03-2006
    Power Line Communication for Lighting Apps using BPSK w/ a Single DSP Controller
    DSP controllers provide the on-chip peripherals and computational power needed to implement various power electronics applications. A single-chip DSP controller allows designers to implement multiple functions such as power line communication, power-factor correction, and inverter control, all needed for an overall dimmable lighting ballast application. This application report presents a complete
  • Скачать » Application Notes, PDF, 93 Кб, 25-10-2007
    Configuring Source of Multiple ePWM Trip-Zone Events
    Applications that require PWM outputs to respond to multiple trip-zones (TZ) are challenged to determine the specific source of the TZ event.This application report describes how to configure an ePWM module to identify the specific source of a TZ event when multiple TZ events are enabled to act on a single PWM channel.
  • Скачать » Application Notes, PDF, 62 Кб, 18-09-2007
    Custom Bootloader Options via One-Time Programmable (OTP) Memory
    The Boot to One-Time-Programmable (OTP) memory mode in the TMS320x280x devices provides the necessary hooks to support custom bootloaders. This is very useful in a situation where a bootloader option, required by a specific customer application, is not already supported as one of the built-in options in the Boot read-only memory (ROM). This application report includes information and examples on h
  • Скачать » Application Notes, PDF, 381 Кб, Rev. A, 09-09-2008
    Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A)
    This application report presents a method for utilizing the on-chip pulse width modulated (PWM) signal generators on the TMS320F280xв„ў family of digital signal controllers as a digital-to-analog converter (DAC). The method involves analog low-pass filtering the PWM signal to remove high frequency components, leaving only the low-frequency content. Theoretical and experimental results are presented
  • Скачать » Application Notes, PDF, 1.3 Мб, 26-07-2007
    Interfacing SD/MMC Cards With TMS320F28xxx DSCs
    This application report and associated code implements the interfacing of Secure Digital (SD) or Multi-Media Card (MMC) types of Flash memory cards with the TMS320F28xxx digital signal controllers (DSCs). These cards can use serial peripheral interface (SPI) or parallel (SD) interface to connect to the host. This application report demonstrates the SPI mode and includes the schematics showing th
  • Скачать » Application Notes, PDF, 641 Кб, Rev. L, 28-02-2013
    Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L)
    Several special requirements exist for running an application from on-chip Flash memory on the TMS320F28xxx. These requirements generally do not manifest themselves during code development in RAM since the Code Composer Studioв„ў (CCS) debugger can mask problems associated with initialized sections and their linkage in memory. This application report covers the application software modificatio
  • Скачать » Application Notes, PDF, 342 Кб, 31-03-2008
    Copying Compiler Sections from Flash to RAM on the TMS320F28xxx DSCs
    This application report and associated code files provide functionality for copying initialized compiler sections from the internal Flash memory to the internal random access memory (RAM) of the TMS320F28xxx digital signal controllers (DSCs) at run time for optimizing execution speed. The solution provided implements this functionality directly after booting before entering the c_int00 C entry rou
  • Скачать » Application Notes, PDF, 240 Кб, Rev. A, 25-10-2007
    Getting Started With TMS320C28x Digital Signal Controllers (Rev. A)
    This guide is organized by development flow and functional areas to make your design effort as seamless as possible. Tips on getting started with TMS320C28xв„ў DSP software and hardware development are provided to aid in your initial design and debug efforts. Each section includes pointers to valuable information including technical documentation, software, and tools for use in each phase of d
  • Скачать » Application Notes, PDF, 185 Кб, 30-10-2001
    An Easy Way of Creating a C-callable Assembly Function for the TMS320C28x DSP
    C-callable assembly routines require an understanding of parameter-passing conventions and environments expected by the C compiler. This application report provides instructions and suggestions to configure the C compiler to assist with these issues.
  • Скачать » Application Notes, PDF, 655 Кб, Rev. A, 14-05-2008
    An Overview of Designing Analog Interface With TM320F28xx/28xxx DSCs (Rev. A)
    This application report provides guidelines that take you through everything from configuring the ADC and related registers correctly, responding to interrupts, and board design recommendations; this may be particularly useful for first-time users of the TMS320C2000в„ў digital signal processor (DSP) platform devices and for firmware engineers with less exposure to the analog world. Various s
  • Скачать » Application Notes, PDF, 407 Кб, 02-05-2003
    Online Stack Overflow Detection on the TMS320C28x DSP
    A stack overflow in an embedded DSP application generally produces a catastrophic software crash due to data corruption, lost return addresses, or both. Traditional off-line approaches to sizing a stack during development, such as filling with a know value, or estimating based on code content, are not 100% reliable. Therefore, programmers often feel compelled to reserve larger stack sizes than are
  • Скачать » Application Notes, PDF, 530 Кб, Rev. D, 27-02-2013
    Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. D)
    This application report explores a hardware abstraction layer implementation to make C/C++ coding easier on C28x devices. This method is compared to traditional #define macros and topics of code efficiency and special case registers are also addressed.
  • Скачать » Application Notes, PDF, 423 Кб, 19-08-2008
    Flash Programming Solutions for the TMS320F28xxx DSCs
    Flash programming is a process that occurs during all stages of a TMS320F28xxx digital signal controller (DSC) development cycle: firmware debug, prototyping, production, and field reprogramming. Several solutions are available to accommodate programming for all of these development stages. This application report presents solutions that are available and at what stage in the development cycle the
  • Скачать » Application Notes, PDF, 407 Кб, 21-09-2009
    EEPROM Emulation With the TMS320F28xxx DSCs
    Many applications require storing small quantities of system related data (e.g., calibration values, device configuration) in a non-volatile memory, so that it can be used or modified and reused even after power cycling the system. EEPROMs are primarily used for this purpose. EEPROMs have the ability to erase and write individual bytes of memory many times over and the programmed locations retain
  • Скачать » Application Notes, PDF, 37 Кб, 22-03-2016
    Calculator for CAN Bit Timing Parameters
    Controller Area Network (CAN) nodes use user-specified timing parameters to sample the asynchronous bitstream and recover the clock. These parameters are typically based on the frequency of the available reference oscillator. There may be several options available for a given frequency, and some of them will allow a looser oscillator tolerance than others. This application report details the creat
  • Скачать » Application Notes, PDF, 2.0 Мб, 16-11-2009
    Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices
    The C28xxx generation of microcontrollers can connect to external nonvolatile memory through a variety of interfaces including parallel, serial peripheral interface (SPI), and inter-integrated circuit (I2C). This application report discusses how to write drivers for your external nonvolatile memory to allow for in-place programming using SDFlash, an application provided by Spectrum Digital, Inc. A
  • Скачать » Application Notes, PDF, 129 Кб, 17-01-2012
    TPS75005 Quick-Start Guide with C2000в„ў Controllers
    The TPS75005 is a complete power management solution for C2000 controllers from Texas Instruments. This document illustrates how to attach the TPS75005 to a C2000 controller.
  • Скачать » Application Notes, PDF, 125 Кб, 15-04-2009
    Common Object File Format (COFF)
  • Скачать » Application Notes, PDF, 201 Кб, Rev. C, 19-04-2016
    Semiconductor and IC Package Thermal Metrics (Rev. C)

На английском языке: Datasheet Texas Instruments TMS320F2806PZQ

    IC MCU 32BIT 64KB FLASH 100LQFP
    Цены на TMS320F2806PZQ
    ПоставщикПроизводительЦена
    ЭлитанTexas Instruments1 460 руб.
    ДКО ЭлектронщикTexas Instrumentsпо запросу
    ЭлектроПластTexas Instrumentsпо запросу
    Кремнийпо запросу
    Подробнее об условиях поставки »

Статус продуктаВ производстве (Рекомендуется для новых разработок)
RoHSСовместим
Бессвинцовая технология (Pb Free)Да
Доступность образцов у производителяНет

Параметры:

ADC (Ch)16
Additional FeaturesSingle Zone Code Security
32-bit CPU Timers
Watchdog Timer
20 pin Oscillator
AEC-Q100 Automotive Qual
Analog to Digital Converter (ADC)ADC12: 2-S/H
6.25-MSPS
Approx. Price (US$)8.70 | 1ku
CAP4
CPUC28x
Flash(KB)64
Frequency(MHz)100
GPIO35
High Resolution PWM(Ch)4
I2C1
Operating Temperature Range(C)-40 to 125
-40 to 85
Other Actuation FeaturesN/A
Other Connectivity FeaturesCAN
Other Sensing FeaturesN/A
PWM Technology TypeType 0
PWM(Ch)12
Package GroupLQFP
Package Size: mm2:W x L (PKG)100LQFP: 256 mm2: 16 x 16(LQFP)
Processing AcceleratorsN/A
QEP2
RAM(KB)20
RatingCatalog
SPI4
Total Processing (MIPS)100
UART2

Корпус / Упаковка / Маркировка:

Pin100100
Package TypePZPZ
Industry STD TermLQFPLQFP
JEDEC CodeS-PQFP-GS-PQFP-G
Package QTY9090
CarrierJEDEC TRAY (5+1)JEDEC TRAY (5+1)
Device MarkingTMS320F2806PZQ
Width (мм)1414
Length (мм)1414
Thickness (мм)1.41.4
Pitch (мм).5.5
Max Height (мм)1.61.6
Mechanical DataСкачать »Скачать »

Классификация производителя:

Semiconductors > Microcontrollers (MCU) > Performance MCUs > Real-time Control > Fixed-point F280x/1x

Комплекты разработчика и оценочные наборы:

  • Development Kits: TMDSDOCK2808
    TMS320F2808 Experimenter Kit
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • Evaluation Modules & Boards: TMDSDCDC2KIT
    C2000 Digital Power Experimenter Kit
    Статус продукта: NRND (Не рекомендуется для новых разработок)
  • Evaluation Modules & Boards: TMDSDCDC8KIT
    C2000 DC/DC Developer's Kit
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • Daughter Cards: TMDSCNCD2808
    TMS320F2808 controlCARD
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: C2000-GANG
    C2000 Gang Programmer
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
    XDS100v2 JTAG Debug Probe (20-pin cTI version)
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
    XDS100v2 JTAG Debug Probe (14-pin TI version)
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU200-U
    XDS200 USB Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
    XDS560v2 System Trace USB & Ethernet Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
  • JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
    XDS560v2 System Trace USB Debug Probe
    Статус продукта: В производстве (Рекомендуется для новых разработок)
Срезы ↓
радиолоцман вконтакте радиолоцман одноклассники радиолоцман facebook радиолоцман twitter радиолоцман google плюс