Радиолоцман Электроника en
расширенный поиск +
  

Texas Instruments LM3S1811-IBZ50-C5T

Производитель:Texas Instruments
Серия:LM3S1811
Модель:LM3S1811-IBZ50-C5T

Stellaris LM3S Microcontroller 108-NFBGA -40 to 85

Документы:

  • Скачать » Datasheet
  • Скачать » Application Notes, PDF, 1.7 Мб, Rev. A, 15-08-2012
    Using Execute, Write/Erase Flash Protection on Stellaris MCUs Using CCS (Rev. A)
    Protection of code and IP in a microcontroller's Flash memory has always been an important consideration for the system designers. StellarisВ® microcontrollers feature a code protection mechanism that enables developers to protect their code and IP in the end application, while providing the flexibility to upgrade the firmware using a boot loader. This application report describes using Flash p
  • Скачать » Application Notes, PDF, 113 Кб, Rev. B, 08-01-2010
    Using AES Encryption and Decryption with Stellaris Microcontrollers (AN01251) (Rev. B)
    This application note describes the following four encryption methods used with AES: Electronic code book (ECB), cipher block chaining (CBC) or chained encryption, cipher feedback (CFB), and counter (CTR). These methods are described in more detail to help you select the appropriate method(s) for your application. The encryption package described in this application note is available with full sou
  • Скачать » Application Notes, PDF, 95 Кб, 07-07-2009
    Programming the On-Chip Flash Memory in a Stellaris Microcontroller (AN01237)
    This application note provides three methods for erasing and programming Flash memory: the StellarisWare Peripheral DriverLib, software polling for completed updates, and interrupt-driven updates.
  • Скачать » Application Notes, PDF, 278 Кб, Rev. B, 04-02-2013
    System Design Guidelines for StellarisВ® Microcontrollers В  (Rev. B)
  • Скачать » Application Notes, PDF, 170 Кб, 07-07-2009
    Using the Stellaris Microcontroller Analog-to-Digital Converter (AN01247)
    This application note describes ADC sampling and configuring Stellaris microcontrollers through the StellarisWare Peripheral Driver Library or through direct writes to the device's control registers.
  • Скачать » Application Notes, PDF, 1.4 Мб, Rev. A, 19-11-2012
    Using SYS/BIOS with StellarisВ® ARMВ® Cortexв„ў-M3 Microcontrollers (Rev. A)
    This document provides a brief overview of the Texas Instruments’ SYS/BIOS Real-Time Operating System (RTOS) and outlines how to implement SYS/BIOS on the Stellaris® Cortex™-M3 family of microcontrollers. In addition to setting up and running an example project provided within the SYS/BIOS software package, this document outlines the process of creating a new SYS/BIOS project with the Code Compose
  • Скачать » Application Notes, PDF, 162 Кб, Rev. E, 24-09-2013
    Differences Among StellarisВ® LM3S and Tivaв„ў C Series TM4C123x MCUs (Rev. E)
    is document addresses design items to be aware of when migrating working designs among Fury-, DustDevil-, Tempest-, and Firestorm-StellarisВ® microcontrollers (MCUs) and Tivaв„ў C Series TM4C123x-class MCUs. Topics covered include both software and hardware issues as well as feature changes and enhancements. All software issues are comprehended in the Driver Library APIs. As a result, syste
  • Скачать » Application Notes, PDF, 172 Кб, Rev. C, 06-11-2013
    Configuring StellarisВ® Tempest- and Firestorm-Class and MCUs W/ Pin Multiplexing (Rev. C)
    Many members of the StellarisВ® family of microcontrollers provide system designers with a great deal of control over the placement and selection of peripheral module signals that are alternate functions for GPIO signals. This application note provides an overview of the pin muxing implementation, an explanation of how a system designer defines a pin configuration, and examples of the pin confi
  • Скачать » Application Notes, PDF, 120 Кб, 07-07-2009
    Using the Stellaris Serial Flash Loader (AN01242)
    This application note describes how to communicate with the Stellaris serial flash loader application.
  • Скачать » Application Notes, PDF, 301 Кб, 07-07-2009
    Using a 9-bit Software UART with Stellaris (AN01280)
    This application note describes how to extend the functionality of the standard hardware UART available on StellarisВ® microcontrollers by using the 9-bit UART add-on.
  • Скачать » Application Notes, PDF, 161 Кб, 07-07-2009
    Optimizing Code Performance and Size for Stellaris Microcontrollers (AN01265)
    This application note provides a summary of factors that affect code performance and size for StellarisВ® microcontrollers and suggestions to improve code performance and size including example code.
  • Скачать » Application Notes, PDF, 127 Кб, Rev. C, 01-11-2012
    StellarisВ® LM3S ADC Calibration (AN01282) (Rev. C)
    This application report describes a method for improving the absolute accuracy of the analog-to-digital converters (ADCs) found on StellarisВ® LM3S microcontrollers. Due to inherent gain and offset errors, the absolute accuracy of the ADC is affected. The methods described in this application report can improve the absolute accuracy of the ADC results.
  • Скачать » Application Notes, PDF, 91 Кб, 07-07-2009
    Using Stellaris MCUs Internal Flash Memory to Emulate EEPROM (AN01267)
    This application note describes how to emulate EEPROM using the internal Flash memory and provides an example application that uses EEPROM emulation drivers.
  • Скачать » Application Notes, PDF, 77 Кб, 07-07-2009
    Software UART for Stellaris Microcontrollers (AN01270)
    This application note looks at implementing a software-based UART which, using general-purpose input/outputs (GPIO), allows the user to overcome hardware limitations or lack of dedicated peripherals.
  • Скачать » Application Notes, PDF, 95 Кб, Rev. A, 08-01-2013
    ADC Oversampling Techniques for Stellaris Microcontrollers (AN01239) (Rev. A)
    Some members of the Stellaris microcontroller family have an analog-to-digital converter (ADC) module. The hardware resolution of the ADC is 10 bits; however, due to noise and other accuracy diminishing factors, the true accuracy is less than 10 bits. This application report provides a software-based oversampling technique, resulting in an improved effective number of bits (ENOB) in the conversion
  • Скачать » Application Notes, PDF, 74 Кб, 07-07-2009
    Implementing RS-232 Flow Control on a Stellaris Microcontroller (AN01255)
    This application note describes how to implement flow control by using the Stellaris GPIO module with its interrupt support.

На английском языке: Datasheet Texas Instruments LM3S1811-IBZ50-C5T

    IC MCU 32BIT 256KB FLASH 108BGA
    Цены на LM3S1811-IBZ50-C5T
    ПоставщикПроизводительЦена
    КремнийTexas Instrumentsпо запросу
    МосЧипTexas Instrumentsпо запросу
    Подробнее об условиях поставки »

Статус продуктаСнят с производства (Производитель прекратил производство прибора)
RoHSНе совместим
Бессвинцовая технология (Pb Free)Нет
Доступность образцов у производителяНет

Корпус / Упаковка / Маркировка:

Pin108108
Package TypeZCRZCR
Industry STD TermNFBGANFBGA
JEDEC CodeS-PBGA-NS-PBGA-N
Device MarkingLM3S1811IBZ50
Width (мм)1010
Length (мм)1010
Thickness (мм).95.95
Pitch (мм).8.8
Max Height (мм)1.51.5
Mechanical DataСкачать »Скачать »

Классификация производителя:

Semiconductors > Microcontrollers (MCU) > Performance MCUs > Control + Automation > LM3S Cortex-M3 Series

Варианты написания: LM3S1811IBZ50C5T, LM3S1811 IBZ50 C5T

Срезы ↓
радиолоцман вконтакте радиолоцман одноклассники радиолоцман facebook радиолоцман twitter радиолоцман google плюс