Радиолоцман Электроника en
расширенный поиск +
  

Производитель:NXP
Серия:74LVC1G123
Модель:74LVC1G123GF,115

Ждущие мультивибраторы

Документы:

На английском языке: Datasheet NXP 74LVC1G123GF,115

Классификация производителя:

Logic > Multivibrators

Варианты написания: 74LVC1G123GF115, 74LVC1G123GF 115

Выписка из документа:
74LVC1G123
Single retriggerable monostable multivibrator; Schmitt trigger inputs
Rev. 4 -27 November 2013 Product data sheet 1. General description
The 74LVC1G123 is a single retriggerable monostable multivibrator with Schmitt trigger inputs. Output pulse width is controlled by three methods: 1. The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). 2. Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (A) or the active HIGH-going edge input (B). By repeating this process, the output pulse period (Q = HIGH) can be made as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input CLR, which also inhibits the triggering. 3. An internal connection from CLR to the input gates makes it possible to trigger the circuit by a HIGH-going signal at input CLR. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in a mixed 3.3 V and 5 V environment. Schmitt trigger inputs, makes the circuit highly tolerant to slower input rise and fall times. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2. Features and benefits Wide supply voltage range from 1.65 V to 5.5 V...

Срезы ↓
радиолоцман вконтакте радиолоцман одноклассники радиолоцман facebook радиолоцман twitter радиолоцман google плюс