Datasheet Linear Technology LT1370HVCT7#PBF — Даташит

Datasheets

Цены

Купить LT1370HVCT7#PBF на РадиоЛоцман.Цены — от 486 до 3 214 ₽ 27 предложений от 15 поставщиков Buck, Boost, Cuk, Flyback, Forward Converter, SEPIC Switching Regulator IC Positive or Negative Adjustable 1.245V 1 Output 6A (Switch) TO-220-7 Formed...
AliExpress Весь мир	LT1374CT7-5 LT1580CT7-2.5 LT1374CT7 LT1371CT7 LT1581CT7 LT1103CT7 LT1513-2CT7 LT3086ET7 LT3081ET7 LT1370HVCT7 TO-220-7	486 ₽	Купить
EIS Components Весь мир	LT1370HVCT7#PBF Analog Devices	521 ₽	Купить
Utmel Весь мир	LT1370HVCT7 Analog Devices	от 591 ₽	Купить
Akcel Весь мир	LT1370HVCT7#PBF Analog Devices	от 1 584 ₽	Купить

Корпус / Упаковка / Маркировка

Параметры

Экологический статус

Другие варианты исполнения

LT1370

Design Notes

• Скачать
  The LT1370: A 500kHz, 6A Monolithic Boost Converter &mdash DN183
  PDF, 78 Кб, Файл опубликован: 1 июл 1998
  Выписка из документа

  advertisement A 500kHz, 6A Monolithic Boost Converter – Design Note 183
  Karl Edwards Circuit Description
  The LT1370 is a current mode switcher. This means that
  switch duty cycle is directly controlled by the switch
  current rather than by the output voltage. This technique has several advantages: immediate response to
  input voltage variations, greatly simplified closed-loop
  frequency compensation, and pulse-by-pulse current
  limiting, which provides maximum switch protection.
  An internal low dropout regulator provides a 2.3V supply
  to all control circuitry. This low dropout design allows
  the input voltage to vary from 2.7V to 30V with virtually
  no change in device performance. An internal 500kHz
  oscillator is the basic clock for all timing. A bandgap
  provides the reference for the feedback error amplifier.
  As with the LT1371, error amplifier circuitry allows the
  LT1370 to directly regulate negative output voltages.
  The NFB pin regulates at –2.48V, while the amplifier’s
  output internally drives the FB pin to 1.245V. The error
  amplifier is a current output (gm) type, so its output
  voltage, present on the VC pin, can be externally clamped
  to lower the current limit. A capacitor-coupled external
  clamp provides soft start.
  The S/S pin has two functions: synchronization and …

Модельный ряд

Классификация производителя

• Power Management > Switching Regulator > SEPIC Regulators
• Power Management > Switching Regulator > Step-Up (Boost) Regulators > Internal Power Switch Boost

Варианты написания:

LT1370HVCT7PBF, LT1370HVCT7 PBF