Схемы - Интерфейсы - 2

Donald Schelle

A USB port offers a handy source of 5 V power for auxiliary devices. A USB port not only supplies power to a microcontroller and other essential circuitry, but also provides enough extra current head room to charge a small battery or supercapacitor ...

Stefano Salvatori

You can use a microcontroller that includes an ADC to design a two-wire-plus-ground keyboard interface. For example, you can use a resistive voltage divider to identify a pressed key (Reference 1). A microcontroller's integrated ADC typically ...

Alfredo Saab Tina Alikahi

The best way to make midrange, low- to medium-accuracy temperature measurements (considering size, cost, performance, and ease of use) is to use an IC temperature sensor. But most IC temperature sensors are designed for applications where the ...

Perhaps the most effective way to gain board space and increase component density is to minimize wiring on the board. A widely used architecture that allows such miniaturization is the I 2 C bus. Comprising only a bidirectional data line, SDA, and ...

Digital-system designs require you to consider many core voltages. Memory operates at 1.8 V, I 2 C and FPGA devices operate at 3.3 V, microcontrollers operate at 5 V, and charge-coupled-device image sensors operate at 9 to 8 V. Clocks for each ...

The design in Figure 1 is a visible optical link for those who need to see the transmitted data. An isolation figure of more than 5000 V is a bonus. Tests of the system used the COM input of a data-acquisition system, as well as a standard PC's ...

The circuit in Figure 1 derives its power from a USB port and produces 5 and 3.3 V supply rails for portable devices, such as digital cameras, MP3 players, and PDAs. The circuit allows the port to maintain communications while, for example, ...

Rajkumar Sharma

This module is an isolated full-duplex differential line driver and receiver for TIA/EIA RS485/RS422 applications (Figure 1). The module is ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode ...

Anthony Smith

Converting band-limited NRZ (non-return-to-zero) data to a digital format suitable for microprocessors and other digital systems poses problems when a signal's duty cycle or amplitude varies or when its average level unpredictably wanders ...