TC7S14F/FU
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7S14F, TC7S14FU
Schmitt Inverter
The TC7S14 is a high speed C2MOS Schmitt Inverter fabricated with silicon gate C2MOS technology. It achieves a high speed operation similar to equivalent LSTTL while maintaining the C2MOS low power dissipation. Pin Configuration and function are the same as the TC7SU04F but input have 25% VCC hysteresis and with its schmitt trigger function, the TC7S14F can be used as line receivers which will receive slow input signal. Input is equipped with protection circuits against static discharge or transient excess voltage. Output currents are 1/2 compared to TC74HC series models.
TC7S14F TC7S14FU Features High speed: tpd = 11 ns (typ.) at VCC = 5 V Low power dissipation: ICC = 1 A (max) at Ta = 25°C High noise immunity: VH = 1.1 V at VCC = 5 V Output drive capability: 5 LSTTL loads Symmetrical output impedance: |IOH| = IOL = 2 mA (min) Balanced propagation delays: tpLH tpHL -Wide operating voltage range: VCC (opr) = 2 to 6 V Weight SSOP5-P-0.95: 0.016 g (typ.) SSOP5-P-0.65A: 0.006 g (typ.) Absolute Maximum Ratings (Ta = 25°C)
Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature range Lead temperature (10 s) Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg TL Rating -0.5 to 7 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 ±20 ±20 ±12.5 ±25 200 -65 to 150 260 Unit V V V mA mA mA mA mW °C °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Start of commercial production 1991-06 1 2014-03-01 TC7S14F/FU
Marking
Part No. Pin Configuration (top view)
VCC 5 OUT Y 4 E A 1 NC 2 IN A 3 GND Logic Diagram
IN A (2) (4) OUT Y Truth Table
A L H Y H L Operating Ranges
Characteristics Supply voltage Input voltage Output voltage Operating temperature range Symbol VCC VIN VOUT Topr Rating 2 to 6 0 to VCC 0 to VCC -40 to 85 Unit V V V °C 2 2014-03-01 TC7S14F/FU
Electrical Characteristics
DC Elec …
