EVALUATION KIT AVAILABLE MAX6955 2-Wire Interfaced, 2.7V to 5.5V LED Display Driver with I/O Expander and Key Scan
Benefits and Features Simplifies Driving 5 x 7 Matrix LED Displays Drives Common-Cathode Monocolor and Bicolor General Description
The MAX6955 is a compact display driver that interfaces microprocessors to a mix of 7-segment, 14-segment, and 16-segment LED displays through an I2C-compatible 2-wire serial interface. The MAX6955 drives up to 16 digits 7-segment, 8 digits 14-segment, 8 digits 16-segment, or 128 discrete LEDs, while functioning from a supply voltage as low as 2.7V. The driver includes five I/O expander or general-purpose I/O (GPIO) lines, some or all of which can be configured as a key-switch reader. The key-switch reader automatically scans and debounces a matrix of up to 32 switches. Included on chip are full 14-and 16-segment ASCII 104-character fonts, a hexadecimal font for 7-segment displays, multiplex scan circuitry, anode and cathode drivers, and static RAM that stores each digit. The maximum segment current for the display digits is set using a single external resistor. Digit intensity can be independently adjusted using the 16-step internal digital brightness control. The MAX6955 includes a low-power shutdown mode, a scan-limit register that allows the user to display from 1 to 16 digits, segment blinking (synchronized across multiple drivers, if desired), and a test mode, which forces all LEDs on. The LED drivers are slew-rate limited to reduce EMI. For an SPI-compatible version, refer to the MAX6954 data sheet. An evaluation kit (EV kit) for the MAX6955 is available. LED Displays Drives Up to 16 Digits 7-Segment, 8 Digits 14-Segment, Applications
Set-Top Boxes Panel Meters White Goods Bar Graph Displays Audio/Video Equipment 8 Digits 16-Segment, 128 Discrete LEDs, or a Combination of Digit Types 2.7V to 5.5V Operation Standard 2-Wire Interface Supports a Variety of Microprocessor Architectures 400kbps 2-Wire I2C-Compatible Interface Integrated Flexibility Supports Different Application Requirements Built-In ASCII 104-Character Font for 14-Segment and 16-Segment Digits and Hexadecimal Font for 7-Segment Digits 16-Step Digit-by-Digit Digital Brightness Control Display Blanked on Power-Up Automatic Blinking Control for Each Segment 10µA (typ) Low-Power Shutdown (Data Retained) Five GPIO Port Pins Can Be Configured as Key-Switch Reader to Scan and Debounce Up to 32 Switches with n-Key Rollover IRQ Output when a Key Input Is Debounced Slew-Rate-Limited Segment Drivers for Lower EMI 36-Pin SSOP and 40-Pin DIP and TQFN Packa …
Купить MAX6955ATL+T на РадиоЛоцман.Цены — от 383 до 1 110 ₽
