Datasheet Texas Instruments ADC08DL500 — Даташит

ADC08DL500
www.ti.com SNAS495C – MARCH 2011 – REVISED MARCH 2011 ADC08DL500 Low Power, 8-Bit, Dual 500 MSPS A/D Converter
Check for Samples: ADC08DL500 FEATURES APPLICATIONS 1 2 Single +1.9V В±0.1V Operation
Duty Cycle Corrected Sample Clock Satellite Modems
Digital Oscilloscopes
Direct RF Down Conversion
Communications Systems
Test Instrumentation DESCRIPTION
The ADC08DL500 is a dual, low power, high performance, CMOS analog-to-digital converter. The ADC08DL500
digitizes signals to 8 bits of resolution at sample rates up to 500 MSPS. Consuming a typical 1.2 Watts in
demultiplex mode at 500 MSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing
codes over the full operating temperature range. The unique folding and interpolating architecture, the fully
differential comparator design, the innovative design of the internal sample-and-hold amplifier and the calibration
schemes enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.2 Effective
Number of Bits (ENOB) with a 125 MHz input signal and a 500 MHz sample rate while providing a 10-18 Code
Error Rate (C.E.R.)
The converter typically consumes 3.3 mW in the Power Down Mode and is available in a lead-free 144-lead
LQFP and operates over the modified Industrial (-40°C ≤ TA ≤ +70°C) temperature range.
Table 1. Key Specifications
VALUE
Resolution
Max Conversion Rate
Code Error Rate …