Datasheet Texas Instruments ISO124U/1K — Даташит
| Производитель | Texas Instruments |
| Серия | ISO124 |
| Модель | ISO124U/1K |
High-Precision Isolation Amplifier 8-SOIC -25 to 85
Datasheets
ISO124 Precision Lowest-Cost Isolation Amplifier datasheet
PDF, 1.1 Мб, Версия: D, Файл опубликован: 7 июл 2016
Выписка из документа
Цены
 Купить ISO124U/1K на РадиоЛоцман.Цены — от 439 до 3 390 ₽25 предложений от 18 поставщиков TEXAS INSTRUMENTS ISO124U/1K Isolation Amplifier, 1 Amplifier, 20mV, 1.5kV, ± 4.5V to ± 18V, SOIC, 8Pins | |||
| ISO124U/1KE4 Texas Instruments | от 439 ₽ | ||
| ISO124U/1K Texas Instruments | 448 ₽ | ||
| ISO124U/1K | 2 952 ₽ | ||
| ISO124U/1K Texas Instruments | по запросу | ||
Статус
| Статус продукта | В производстве (Рекомендуется для новых разработок) |
| Доступность образцов у производителя | Нет |
Корпус / Упаковка / Маркировка
| Pin | 8 | 8 |
| Package Type | DVA | DVA |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 1000 | 1000 |
| Carrier | LARGE T&R | LARGE T&R |
| Маркировка | 124U | ISO |
| Width (мм) | 7.5 | 7.5 |
| Length (мм) | 17.9 | 17.9 |
| Thickness (мм) | 2.3 | 2.3 |
| Pitch (мм) | 1.27 | 1.27 |
| Max Height (мм) | 2.65 | 2.65 |
| Mechanical Data | Скачать | Скачать |
Параметры
| Common Mode Rejection Ratio(Typ) | 140 дБ |
| Gain Non-Linearity (+/-)(Max) | 0.01 % |
| Isolation Working Voltage VIOWM (rms) | 1500 В |
| Leakage Current at 240V/60Hz(Max) | 0.5 uArms |
| Рабочий диапазон температур | от -25 до 85 C |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 185 mm2: 10.33 x 17.9(SOIC) PKG |
| Rating | Catalog |
| Small Signal Bandwidth(Typ) | 50 kHz |
Экологический статус
| RoHS | Совместим |
Application Notes
- Isolated RS-485 Reference DesignPDF, 80 Кб, Файл опубликован: 28 окт 2009
This design note presents the reference designs of isolated RS-485 nodes, using bus voltages of 3.3 V and 5 V. Various transceivers are used to satisfy the requirements for low, medium, and high data rates, as well as to accommodate the need for half- and full-duplex operation. - Simple Output Filter Eliminates ISO Amp Output Ripple And Keeps Full BandwidthPDF, 186 Кб, Файл опубликован: 27 сен 2000
The ISO120/121/122 isolation amplifiers (ISO amps) have a small (10-20mVp-p typ) residual demodulator ripple at the output. A simple filter can be added to eliminate the output ripple without decreasing the 50kHz signal bandwidth of the ISO amp. - Noise Sources In Applications Using Capacitive Coupled Isolated AmplifierPDF, 101 Кб, Файл опубликован: 27 сен 2000
Noise is a typical problem confronting many isolation applications. Isolation products such as analog isolation amplifiers, optocouplers, transformers and digital couplers, are used in applications to transmit signals across a high voltage barrier while providing galvanic separation between two grounds.
Модельный ряд
Серия: ISO124 (5)
- ISO124P ISO124U ISO124U/1K ISO124U/1KE4 ISO124UE4
Классификация производителя
- Semiconductors > Amplifiers > Special Function Amplifiers > Isolated Amplifiers
