Datasheet Analog Devices AMP01NBC — Даташит

REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes to slew rate test. Changes IAW NOR 5962-R194-93. 93-08-25 M. A. FRYE B Changes boilerplate to add one-part numbers. Add device type 03.
Add delta test limits. Redrawn. 97-06-03 R. MONNIN C Change to group A subgroups for TCVOOS in table I. Update boilerplate. -rrp 00-10-26 R. MONNIN D Add device type 01 limits to table IIB. -ro 02-11-22 R. MONNIN E Drawing updated to reflect current requirements. -ro 06-05-16 R. MONNIN F Make changes to the VOOS test for device type 03 as specified under Table I
and Table IIB. -ro 08-07-01 R. HEBER G Update drawing to current MIL-PRF-38535 requirements. -rrp 13-02-14 C. SAFFLE THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS REV G G G G G G G G G G G G OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY
CHARLES E. BESORE STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE AMSC N/A DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil CHECKED BY
WILLIAM J. JOHNSON APPROVED BY
MICHAEL A. FRYE MICROCIRCUIT, LINEAR, INSTRUMENTATION
AMPLIFIER, MONOLITHIC SILICON DRAWING APPROVAL DATE
88-09-13 REVISION LEVEL …

Low Noise, Precision
Instrumentation Amplifier
AMP01 Data Sheet changes have minimal effect on offset; TCVIOS is typically
0.15 μV/°C. Excellent low frequency noise performance is
achieved with a minimal compromise on input protection. The
bias current is very low, less than 10 nA over the military
temperature range. High common-mode rejection of 130 dB,
16-bit linearity at a gain of 1000, and 50 mA peak output
current are achievable simultaneously. This combination takes
the instrumentation amplifier one step further towards the
ideal amplifier. FEATURES
Low offset voltage: 50 μV maximum
Very low offset voltage drift: 0.3 μV/°C maximum
Low noise: 0.12 μV p-p (0.1 Hz to 10 Hz)
Excellent output drive: ±10 V at ±50 mA
Capacitive load stability: up to 1 μF
Gain range: 0.1 to 10,000
Excellent linearity: 16-bit at G = 1000
High CMR: 125 dB minimum (G = 1000)
Low bias current: 4 nA maximum
Can be configured as a precision op amp
Output-stage thermal shutdown
Available in die form AC performance complements the superb dc specifications. The …

Low Noise, Precision
Instrumentation Amplifier
AMP01 Data Sheet Input offset voltage is very low (20 μV), which generally
eliminates the external null potentiometer. Temperature changes
have minimal effect on offset; TCVIOS is typically 0.15 μV/°C.
Excellent low frequency noise performance is achieved with a
minimal compromise on input protection. The bias current is
very low, less than 10 nA over the military temperature range.
High common-mode rejection of 130 dB, 16-bit linearity at a
gain of 1000, and 50 mA peak output current are achievable
simultaneously. This combination takes the instrumentation
amplifier one step further towards the ideal amplifier. FEATURES
Low offset voltage: 50 μV maximum
Very low offset voltage drift: 0.3 μV/°C maximum
Low noise: 0.12 μV p-p (0.1 Hz to 10 Hz)
Excellent output drive: ±10 V at ±50 mA
Capacitive load stability: up to 1 μF
Gain range: 0.1 to 10,000
Excellent linearity: 16-bit at G = 1000
High CMR: 125 dB minimum (G = 1000)
Low bias current: 4 nA maximum
Can be configured as a precision op amp
Output-stage thermal shutdown …