Datasheet Intersil X9319WS8Z — Даташит

DATASHEET
X9319 FN8185
Rev 3.00
July 31, 2014 Digitally Controlled Potentiometer (XDCPв„ў)
The Intersil X9319 is a digitally controlled potentiometer
(XDCP). The device consists of a resistor array, wiper
switches, a control section, and nonvolatile memory. The
wiper position is controlled by a 3-wire interface. Features The potentiometer is implemented by a resistor array
composed of 99 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the CS, U/D, and INC inputs.
The position of the wiper can be stored in nonvolatile
memory and then be recalled upon a subsequent power-up
operation. Terminal voltage, 0 to +10V The device can be used as a three-terminal potentiometer
for voltage control or as a two-terminal variable resistor for
current control in a wide variety of applications. Low power CMOS
-VCC = 5V
-Active current, 3mA max.
-Standby current, 1mA max. Applications Solid-state potentiometer 3-wire serial interface 100 wiper tap points
-Wiper position stored in nonvolatile memory and
recalled on power-up 99 resistive elements
-Temperature compensated …