DATASHEET
X9C102, X9C103, X9C104, X9C503 FN8222
Rev 3.00
July 20, 2009 Digitally Controlled Potentiometer (XDCPв„ў)
The X9C102, X9C103, X9C104, X9C503 are Intersils’
digitally controlled (XDCP) potentiometers. The device
consists of a resistor array, wiper switches, a control section,
and non-volatile memory. The wiper position is controlled by
a three-wire interface.
The potentiometer is implemented by a resistor array
composed of 99 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the CS, U/D, and INC inputs.
The position of the wiper can be stored in non-volatile
memory and then be recalled upon a subsequent power-up
operation. Features Solid-State Potentiometer Three-Wire Serial Interface 100 Wiper Tap Points
-Wiper Position Stored in Non-volatile Memory and
Recalled on Power-up 99 Resistive Elements
-Temperature Compensated
-End-to-End Resistance, В±20%
-Terminal Voltages, В±5V The device can be used as a three-terminal potentiometer or
as a two-terminal variable resistor in a wide variety of …
