Datasheet Intersil HM-65162-883 — Даташит

DATASHEET
HM-65162/883 FN3001
Rev.1.00
March 1997 2kx8 Asynchronous CMOS Static RAM Features Description This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1. The HM-65162/883 is a CMOS 2048 x 8 Static Random
Access Memory manufactured using the Intersil Advanced
SAJI V process. The device utilizes asynchronous circuit
design for fast cycle time and ease of use. The pinout is the
JEDEC 24 pin DIP, and 32 pad 8-bit wide standard which
allows easy memory board layouts flexible to accommodate
a variety of industry standard PROMs, RAMs, ROMs and
EPROMs. The HM-65162/883 is ideally suited for use in
microprocessor based systems with its 8-bit word length
organization. The convenient output enable also simplifies
the bus interface by allowing the data outputs to be controlled independent of the chip enable. Gated inputs lower
operating current and also eliminate the need for pull-up or
pull-down resistors. Fast Access Time 70/90ns Max Low Standby Current . 50пЃ­A Max Low Operating Current 70mA Max Data Retention at 2.0V 20пЃ­A Max TTL Compatible Inputs and Outputs JEDEC Approved Pinout (2716, 6116 Type) No Clocks or Strobes Required Wide Temperature Range . -55oC to +125oC Equal Cycle and Access Time Single 5V Supply Gated Inputs
-No Pull-Up or Pull-Down Resistors Required Ordering Information
70ns/20пЃ­A 90ns/40пЃ­A HM1-65162B/883 HM1-65162/883 HM4-65162B/883 HM4-65162/883 90ns/300пЃ­A TEMP. RANGE
-55oC to 125oC
-55oC to 125oC HM1-65162C/883
-PACKAGE PKG. NO. CERDIP F24.6 CLCC J32.A Pinouts NC NC NC VCC NC NC HM-65162/883 (CLCC)
TOP VIEW …