Datasheet Microchip MIC94064YC6-TR — Даташит

MIC94064/5
High Side Power Switches General Description Features The MIC94064 and MIC94065 are high-side load
switches designed for operation between 1.7V to 5.5V.
The devices contain a low on-resistance P-channel
MOSFET that supports over 2A of continuous current.
The MIC94064/5 provides a slew rate controlled SoftStart turn-on of 115Вµs (typical) to prevent in-rush current
from glitching supply rails.
The MIC94065 features an active load discharge circuit
which insures capacitive loads retain no charge when
the main switch is in an OFF state.
An active pull-down on the enable input keeps
MIC94064/5 in a default OFF state until the EN pin is
pulled to a high level. Built-in level shift circuitry allows
low voltage logic signals to switch higher supply
voltages, or vice versa; high level logic signals can
control low level voltages.
The MIC94064/5’s operating voltage range makes them
suitable for 1-cell Lithium ion and 2-to 3-cell
NiMH/NiCad/Alkaline powered systems, as well as all 5V
applications. Their low operating current of 2ВµA and low
shutdown current of <1ВµA maximize battery life.
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com. 1.7V to 5.5V input voltage range …