Datasheet Intersil ISL8560MREP — Даташит

DATASHEET
ISL8560MR FN6621
Rev 1.00
November 11, 2011 DC/DC Power Switching Regulator
The ISL8560MREP is a step down DC/DC power switching
regulator which accepts 9.0V to 60V input and provides a 2A
output current. The output voltage can be set in the range
between 1.21V and 55V by means of an external divider.
The device uses an internal power DMOS transistor with a
typical rDS(ON) of 0.19пЃ— to obtain very high efficiency and
high switching speed. A switching frequency in the range of
100kHz to 600kHz can be realized (the maximum power
dissipation of the various packages must be observed).
Notable features of this next generation of DC/DC converter
includes pulse-by-pulse current limit for FET protection,
hiccup mode for short circuit protection, voltage feedforward
regulation, Frequency SYNC, soft-start, low standby current
of 60ВµA typical in the disabled state, and thermal shut-down.
The device is available in a 20 Ld QFN package. Features Specifications per DLA VID V62/08608 Full Mil-Temp Electrical Performance from -55В°C to +125В°C Controlled Baseline with One Wafer Fabrication Site and
One Assembly/Test Site Full Homogeneous Lot Processing in Wafer Fab No Combination of Wafer Fabrication Lots in Assembly Full Traceability Through Assembly and Test by
Date/Trace Code Assignment Enhanced Process Change Notification Enhanced Obsolescence Management Eliminates Need for Up-Screening a COTS Component Voltage Feedforward Mode Device Information
The specifications for an Enhanced Product (EP) device are
defined in a Vendor Item Drawing (VID), which is controlled …