Datasheet Intersil IS9-1715AEH-Q Radiation Hardened Complementary Switch FET Driver Datasheets- Скачать » Datasheet PDF, 316 Кб, Версия: 2017-12-21
IS-1715ARH, IS-1715AEH Datasheet Выписка из документа ↓DATASHEET IS-1715ARH, IS-1715AEH FN4875 Rev.2.00 Dec 21, 2017 Radiation Hardened Complementary Switch FET Drivers The radiation hardened IS-1715ARH and IS-1715AEH are high speed, high current, complementary power FET drivers designed for use in synchronous rectification circuits. Soft switching transitions for the two output waveforms can be managed by setting the independently programmable delays. Alternatively, the delay pins can be configured for zero-voltage sensing to allow for precise switching control. Features Electrically screened to SMD #5962-00521 QML qualified per MIL-PRF-38535 requirements Radiation environment Gamma dose 3x105rad(Si) Latch-up immune The IS-1715ARH and IS-1715AEH have a single input, which is PWM and TTL compatible, and can run at frequencies up to 1MHz. The AUX output switches immediately at the rising edge of the INPUT, but waits for the T2 delay before responding to the falling edge. A logic low on the enable pin (ENBL) places both outputs into an active-low mode, and an Undervoltage Lockout (UVLO) function is set at 9V (maximum). PWR output current (source and sink): 3A (peak) These devices are constructed with the Intersil dielectrically isolated Rad Hard Silicon Gate (RSG) process and are immune to Single Event Latch-Up (SEL). They have been specifically designed to provide highly reliable performance in harsh radiation environments. Both outputs active-low in Sleep mode AUX output current (source and sink): 3A (peak) Low operating supply current: 6mA (max) Wide programmable delay range: 100ns to 600ns Configurable for zero-voltage switching Switching frequency to 1MHz 9V (maximum) UVLO Related Literature For a full list of related documents, visit our website IS-1715ARH, IS-1715AEH product pages Applications Synchronous rectification in power supplies ...
Цены
Корпус / Упаковка / МаркировкаКорпус | 16 Ld CFP |
---|
Индекс корпуса | K16.A |
---|
ПараметрыClass | V |
---|
DLA SMD | 5962-00521 |
---|
Description | Radiation Hardened Complementary Switch FET Driver |
---|
High Dose Rate (HDR) krad(Si) | 300 |
---|
Low Dose Rate (ELDRS) krad(Si) | 50 |
---|
Рабочий диапазон температур | от -55 до 125 |
---|
Qualification Level | QML Class V (space) |
---|
SEL (MeV/mg/cm2) | SEL free |
---|
Экологический статусДругие варианты исполненияIS-1715ARH Модельный рядСерия: IS-1715AEH (2) Классификация производителя- Space & Harsh Environment > Rad Hard Power > RH MOSFET Drivers
Варианты написания:IS91715AEHQ, IS9 1715AEH Q На английском языке: Datasheet Intersil IS9-1715AEH-Q
|
|