Datasheet Microchip PL123E-05SC-R — Даташит

(Preliminary) PL123E-05 Low Skew Zero Delay Buffer
FEATURES DESCRIPTION п‚ п‚ п‚ п‚ The PL123E-05 (-05H for High Drive) is a high performance, low skew, low jitter zero delay buffer d esigned
to distribute high speed clocks. It has five low-skew
outputs that are synchronized with the input. The sy nchronization is established via CLKOUT feed back to
the input of the PLL. Since the skew between the input
and output is less than п‚±100ps, the device acts as a
zero delay buffer. The input output propagation delay
can be advanced or delayed by adjusting the load on
the CLKOUT pin. п‚ п‚ Frequency Range 10MHz to 220MHz
Zero input -output delay.
Low output-to-output skew.
Optional Drive Strength:
Standard (8mA) PL123E-05
High (12mA)
PL123E-05H
2.5V or 3.3V, В±10% operation.
Available in 8-pin SOP packaging. These parts are not intended for 5V input-tolerant applications. PIN CONFIGURATION
REF 1 8 CLKOUT CLK2 2 7 CLK4 CLK1 3 6 VDD GND 4 5 CLK3 SOP-8L
BLOCK DIAGRAM REF PLL CLKOUT
CLK1
CLK2
CLK3
CLK4 Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1(408) 944 -0800 fax +1(408) 474-1000 www.micrel.com Rev 12/13/11 Page 1 (Preliminary) PL123E-05 Low Skew Zero Delay Buffer …

PL123E-09 (Preliminary) Low Skew Zero Delay Buffer
FEATURES DESCRIPTION п‚ п‚ п‚ п‚ The PL123E-09 (-09H for High Drive) is a high performance, low skew, low jitter zero delay buffer d esigned
to distribute high speed clocks. It has two low-skew
output banks, of 4 outputs each, that are synchronized
with the input. Control of the two banks o f outputs is
achieved by using the S1 and S2 inputs as shown in
the Selector Definition table on page 2. п‚ п‚ Frequency Range 10MHz to 220MHz
Zero input -output delay.
Low Output to Output Skew
Optional Drive Strength:
Standard (8mA) PL123E-09
High (12mA) PL123E-09H
2.5V or 3.3V, В±10% operation.
Available in 16-Pin SOP or TSSOP packages The synchronization is established via CLKOUT feed
back to the input of the PLL. Since the skew between
the input and output is less than п‚±100ps, the device
acts as a zero delay buffer. The input output propagation delay can be advanced or delayed by adjusting the
load on the CLKOUT pin.
These parts are not intended for 5V input-tolerant applications. BLOCK DIAGRAM PLL REF Mux CLKOUT CLKA2
CLKA3 Bank A CLKA1 CLKA4 S2 Selector
Inputs CLKB2
CLKB3 Bank B S1 CLKB1 REF 1 16 CLKOUT CLKA1 2 15 CLKA4 CLKA2 3 14 CLKA3 VDD 4 13 VDD GND 5 12 GND CLKB1 6 11 CLKB4 CLKB2 7 10 CLKB3 S2 8 9 S1 CLKB4 Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1(408) 944 -0800 fax +1(408) 474-1000 www.micrel.com Rev 12/13/11 Page 1 (Preliminary) PL123E-09 Low Skew Zero Delay Buffer
PIN DESCRIPTIONS …

PL123S-05/-09
Spread-Compatible Low Skew Zero Delay Buffer
FEATURES DESCRIPTION п‚ п‚ The PL123S-05/-09 (-05H/-09H for High Drive) are high
performance, low skew, low jitter zero delay buffers
designed to distribute high speed clocks. They have
one (PL123S-05) or two (PL123S-09) low-skew output
banks, of 4 outputs each, that are synchronized with
the input. The PL123S-09 allows control of the banks
of outputs by using the S1 and S2 inputs as shown in
the Selector Definition table on page 2. п‚ п‚ п‚ п‚ п‚ п‚ Frequency Range 10MHz to 134 MHz
Output Options:
o 5 outputs PL123S-05
o 9 outputs PL123S-09
Zero input -output delay
Optional Drive Strength:
Standard (8mA) PL123S-05/-09
High (12mA) PL123S-05H/-09H
3.3V, В±10% operation
Available in Commercial and Industrial temperature
ranges
Available in 16-Pin SOP or TSSOP (PL123S-09),
and 8-Pin SOP (PL123S-05) packages
Spread-compatible with spread-spectrum modulation clock inputs The synchronization is established via CLKOUT feed …