Datasheet Microchip SY100E142 — Даташит

NOT RECOMMENDED FOR NEW DESIGNS
SY10E142 9-BIT SHIFT
REGISTER Micrel, Inc. FEATURES DESCRIPTION в–  700MHz min. shift frequency
■ Extended 100E VEE range of –4.2V to –5.5V The SY10/100E142 are high-speed 9-bit shift registers
designed for use in new, high-performance ECL systems.
The E142 can accept serial or parallel data to be shifted out
in one direction as both serial and parallel outputs. The
nine inputs, D0-D8, accept parallel input data, while S-IN
accepts serial input data.
The SEL (Select) control pin serves to determine the
mode of operation, either SHIFT or LOAD. The shift direction
is from bit 0 to bit 8. The input data has to meet the set-up
time before being clocked into the nine input registers on
the rising edge of CLK1 or CLK2. Shifting is also performed
on the rising edge of either CLK1 or CLK2. The MR (Master
Reset) control signal asynchronously resets all nine
registers to a logic LOW when a logic HIGH is applied to
MR.
The E142 is designed for applications such as diagnostic
scan registers, parallel-to-serial conversions and is also
suitable for byte-wide parity. в– 
в– 
в–  …