» Datasheets

Datasheet Microchip EQCO-SDI-30-7502

The EQCO-SDI30-7502 Repeater extends SDI transmission up to 220m over a standard 75Ω RG6 Coaxial Cable

Datasheets

• Скачать » Datasheet, PDF, 1.9 Мб, 28-11-2016
  EQCO30R5.D Data Sheet
  Выписка из документа ↓
  EQCO30R5.D
  EQCO30R5.D 3G/HD-SDI Video Cable Equalizer
  Features Introduction Supports up to 140 Meters of Cable at 2.97 Gbps
  Using High-Quality Coax Supports up to 200 Meters of Cable at 1.485
  Gbps Using High-Quality Coax Supports up to 450 Meters of Cable at 270 Mbps
  Using High-Quality Coax Compatible with all SMPTE3G SDI Data Rates:
  -SMPTE259M SDI, 143 to 360 Mbps
  -SMPTE344M, 540 Mbps
  -SMPTE292M HD-SDI, 1.485 Gbps
  -SMPTE372M Dual-Link HD-SDI, 2.97 Gbps
  -SMPTE424M Dual-Speed 3G-SDI, 2.97 Gbps Pin Compatible with Gennum and National
  Semiconductor Parts Also Operates with 8B/10B Coding Single 3.3V Supply. Low Power Consumption (220 mW, 3.3V Supply;
  80 mW, 1.2V Supply) Better Robustness Due to Transmit Amplitude
  Independent Operation 16-Pin, 0.65 mm Pin Pitch, 4 mm QFN Package -40В°C to +85В°C Industrial Temperature Range Pb-Free and RoHS Compliant The EQCO30R5 is a video equalizer for 3G/HD/SD-SDI
  video, with speeds up to 2.97 Gbps. It is designed to be
  a direct replacement for competing video equalizers. In
  addition to downlink functionality from camera to frame
  grabber, it can also transmit a 5 Mbps uplink signal from
  the frame grabber to the camera. Additionally, power
  can be provided over the same cable using the same
  chip and a few external components. The device
  operates with 8B/10B coded signals up to 3.125 Gbps. Applications High Definition, High Frame Rate Pro-Video HD-SDI
  Frame Store Surveillance, Industrial/Inspection, Medical ...
• Скачать » Datasheet, PDF, 430 Кб, 08-02-2016
  EQCO30T5.2 Data Sheet
  Выписка из документа ↓
  EQCO30T5.2
  EQCO30T5.2 3G/HD-SDI Video Cable Driver
  Features Introduction Compatible with all SMPTE3G SDI Data Rates:
  -SMPTE259M SDI, 143 to 360 Mbps
  -SMPTE344M, 540 Mbps
  -SMPTE292M HD-SDI, 1.485 Gbps
  -SMPTE372M Dual-Link HD-SDI, 2.97 Gbps
  -SMPTE424M Dual-Speed 3G-SDI, 2.97 Gbps Pin Compatible with Gennum and National
  Semiconductor Parts Loss of Signal Detect at Input, Optional 3 dB Input
  Trace/Receive Equalization Also Operates with 8B/10B Coding Single 3.3V Supply. Low Power Consumption (150 mW, 3.3V supply) Output Driver Enable LF-Uplink Receiver Included, Receiving 5 Mbps in
  Full-Duplex Communication for Cable Lengths in
  0-450m Range Up to 900 mA can be Received for Powering
  Camera Devices Selectable Slew Rate for SD and HD/3G 16-Pin, 0.65 mm Pin Pitch, 4 mm QFN Package -40В°C to +85В°C Industrial Temperature Range Pb-Free and RoHS Compliant The EQCO30T5 is a video cable driver for 3G/HD/SDI
  video, with speeds up to 4.0 Gbps. It is designed to be
  a direct replacement for competing cable drivers. In
  addition to downlink functionality from camera to frame
  grabber, it can also receive a 5 Mbps uplink signal from
  the frame grabber to the camera. Additionally, power
  can be provided over the same cable using the same
  chip and a few external components. The device
  operates with 8B/10B coded signals and with SMPTE
  signals up to 2.97 Gbps. Applications High Definition, High Frame Rate Pro-Video
  HD-SDI Frame Store Surveillance, Industrial/Inspection, Medical Video ...

Цены

Другие варианты исполнения

EQCO30R5

Классификация производителя

• High-Speed Networking and Video > Video Sub-Systems

На английском языке: Datasheet Microchip EQCO-SDI-30-7502

При перепечатке материалов с сайта прямая ссылка на РадиоЛоцман обязательна.

Приглашаем авторов статей и переводов к публикации материалов на страницах сайта.