Datasheet Microchip MCP25625-E/ML

MCP2561/2
High-Speed CAN Transceiver
Features: Description: Supports 1 Mb/s Operation Implements ISO-11898-2 and ISO-11898-5 пЂ 
Standard Physical Layer Requirements Very Low Standby Current (5 ВµA, typical) VIO Supply Pin to Interface Directly to пЂ 
CAN Controllers and Microcontrollers with пЂ 
1.8V to 5.5V I/O SPLIT Output Pin to Stabilize Common Mode in
Biased Split Termination Schemes CAN Bus Pins are Disconnected when Device is
Unpowered:
-An Unpowered Node or Brown-Out Event will
Not Load the CAN Bus Detection of Ground Fault:
-Permanent Dominant Detection on TXD
-Permanent Dominant Detection on Bus Power-on Reset and Voltage Brown-Out
Protection on VDD Pin Protection Against Damage Due to Short-Circuit
Conditions (Positive or Negative Battery Voltage) Protection Against High-Voltage Transients in
Automotive Environments Automatic Thermal Shutdown Protection Suitable for 12V and 24V Systems Meets or exceeds stringent automotive design
requirements including “Hardware Requirements
for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Version 1.3, May 2012 High-Noise Immunity Due to Differential Bus
Implementation High Electrostatic Discharge (ESD) Protection on
CANH and CANL, meeting the IEC61000-4-2 up
to В±14 kV Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L Temperature ranges:
-Extended (E): -40В°C to +125В°C
-High (H): -40В°C to +150В°C The MCP2561/2 is a Microchip Technology Inc. second
generation high-speed CAN transceiver. It serves as an …