Datasheet NXP 74HCT4053 — Даташит

74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
Rev. 9 — 10 February 2016 Product data sheet 1. General description
The 74HC4053; 74HCT4053 is a triple single-pole double-throw analog switch (3x SPDT)
suitable for use in analog or digital 2:1 multiplexer/demultiplexer applications. Each switch
features a digital select input (Sn), two independent inputs/outputs (nY0 and nY1) and a
common input/output (nZ). A digital enable input (E) is common to all switches. When E is
HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of
current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits Wide analog input voltage range from 5 V to +5 V Complies with JEDEC standard no. 7A Low ON resistance:
 80 (typical) at VCC  VEE = 4.5 V
 70 (typical) at VCC  VEE = 6.0 V
 60 (typical) at VCC  VEE = 9.0 V Logic level translation: to enable 5 V logic to communicate with 5 V analog signals Typical 'break before make' built-in ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 CDM JESD22-C101E exceeds 1000 V Multiple package options Specified from 40 C to +85 C and 40 C to +125 C 3. Applications Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating 74HC4053; 74HCT4053 NXP Semiconductors Triple 2-channel analog multiplexer/demultiplexer 4. Ordering information
Table 1. Ordering information Type number
74HC4053D Package
Temperature range Name Description Version 40 C to +125 C SO16 plastic small outline package; 16 leads;
body width 3.9 mm SOT109-1 40 C to +125 C SSOP16 plastic shrink small outline package; 16 leads;
body width 5.3 mm SOT338-1 40 C to +125 C TSSOP16 plastic thin shrink small outline package; 16 leads;
body width 4.4 mm SOT403-1 40 C to +125 C DHVQFN16 plastic dual in-line compatible thermal enhanced very
thin quad flat package; no leads; 16 terminals;
body 2.5  3.5  0.85 mm 74HCT4053D …