Datasheet Toshiba TCB503HQ — Даташит

Preliminary TCB503HQ CDMOS Linear Integrated Circuit Silicon Monolithic TCB503HQ
Maximum Power 50 W BTL × 4ch Audio Power Amp IC 1. Description The TCB503HQ is a power IC with built-in four-channel BTL
amplifier developed for car audio application. The maximum
output power POUT is 50 W using a pure complementary
P-ch and N-ch DMOS output stage.
In addition, a standby switch, a mute function, output DC offset
voltage detection, various protection features are included. 2. Applications
Weight: 7.7 g (typ.) Power Amp IC developed for car audio applications. 3. Features • High output power, low distortion, and low noise property
(for details, refer to the Table 1 Typical Characteristics).
• Built-in output DC offset detection. (Pin25)
• Built-in output clip detection. (Pin1) Table 1 Typical characteristics
(Note 1) • Built-in muting function. (Pin 22)
• Built-in auto muting functions (for low VCC and standby
sequence) Test condition • Built-in standby switch. (Pin4)
• Built-in various protection circuits (thermal shut down,
over-voltage, short to GND, short to VCC, and output to output
short)
• 6 V operations (Engine idle reduction capability) Typ. Unit Output power (POUT)
VCC = 15.2 V, max power 50 VCC = 14.4 V, max power 44 VCC = 14.4 V, THD = 10% 29 W Total harmonic distortion (THD)
POUT = 4 W 0.01 % Output noise voltage (VNO) (Rg = 0 Ω)
Filter: A weighted 45 µV Operating Supply voltage range (VCC)
RL_amp = 4 Ω 6 to 18 V Note 1: Typical test conditions:
Unless otherwise specified, VCC = 14.4 V, f = 1 kHz, RL_amp = 4 Ω, and Ta = 25°C …