Datasheet Sanyo LA4182

Ordering number: EN742G Monolithic Linear IC LA4182
2.3 W 2-Channel AF Power Amplifier Package Dimensions Features . Built-in 2 channels enabling use in stereo and bridge
applications amplifier
High output: 2.3 W/channel, V = 9 V, R = 4 Ω, and
W/bridge, R = 8 Ω 4.7
Minimum number of external parts required : 9 pcs. min (Stereo/bridge).
Small pop noise at the time of power supply ON/OFF due to
muting circuit built-in
Good ripple rejection ratio due to built-in ripple filter Soft tone at the time of output saturation Good channel separation Voltage gain fixed at 45 dB (Bridge: 51 dB). Variable
gain available with external resistor added voltage
Easy to design radiator fin. 3022A-DIP12F L [LA4182] L 12 0.4 7.62
6.45 7 1 5.12 6 0.81 0.5
2.54 3.6 3.46 4.26max
3.5 19.4 0.51min CC unit : mm 1.3 SANYO : DIP12F Note) In general applications, heat generated in this package
can be radiated through the Cu-foiled area of the printed
circuit board, but since power dissipation Pd may be
increased depending on the supply voltage and load
conditions, it is recommended to use a fin additionally. Specifications
Maximum Ratings at Ta = 25°C
Parameter Symbol Maximum supply voltage VCC max Allowable power dissipation Pd max Conditions Ratings Unit With signal 11 V Quiescent 15 V 4 W With printed circuit board
(Refer to Pd-Ta characteristics) Operating temperature Topr –20 to +75 °C Storage temperature Tstg –55 to +150 °C Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious …