SKY65728-11: Shielded Low-Noise Amplifier Front-End Module with GPS L5 Pre-Filter
PRODUCT SUMMARY SKY65728-11: Shielded Low-Noise Amplifier Front-End
Module with GPS L5 Pre-Filter
Applications GPS L5 radio receivers Fitness/activity trackers Smartphones Laptop PCs and tablets Features Innovative proprietary shielded technology Wideband pre-filter Figure 1. SKY65728-11 Block Diagram Small signal gain: 16 dB typical Excellent out-of-band rejection Description Low noise figure: 1.6 dB typical The SKY65728-11 is a shielded front-end module (FEM) with an
integrated low-noise amplifier (LNA) and pre-filter designed for
Global Positioning System (GPS) L5 band receiver applications.
The device provides high linearity, excellent gain, a high 1 dB
input compression point (IP1dB), and a superior noise figure (NF). Low current consumption Input/output impedance internally matched to 50 Single DC supply: 1.1 to 2.85 V Minimal number of external components required Small MCM (9-pin, 1.6 x 1.6 x 0.7 [nominal] mm) package
(MSL3, 260 C per JEDEC J-STD-020) The pre-filter provides the low in-band insertion loss and
integrated notch filtering for excellent rejections of the cellular,
PCS, and WLAN frequency bands. The SKY65728-11 uses
surface-mount technology (SMT) in a Multi-Chip Module (MCM)
package, which allows for a highly manufacturable and low-cost
solution.
A functional block diagram is shown in Figure 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
205455A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 1, 2019 1 PRODUCT SUMMARY • SKY65728-11: SHIELDED LOW-NOISE AMPLIFIER FEM WITH GPS L5 FILTER Ordering Information
Part Number
SKY65728-11 Product Description
Shielded Low-Noise Amplifier FEM with GPS L5 Filter Evaluation Board Part Number
SKY65728-11EK1 Copyright © 2019 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulti …
