Datasheet Maxim MAX16152ABAD+T — Даташит

Datasheets

Цены

Подробное описание

Ultra-Low-Current Supervisor with Dynamic Watchdog in Tiny SOT Package

The MAX16152/MAX16153/MAX16154/MAX16155 ultra-low-current supervisory circuits monitor a single system supply voltage and the integrity of code execution by a microprocessor or microcontroller.

These supervisors assert the reset output whenever the VCC supply voltage is greater than the minimum operating voltage, but less than the reset threshold. After the supply voltage rises above the reset threshold, the reset output remains asserted for the reset timeout period, and then de-asserts. Reset voltage thresholds are available from 1.50V to 5.0V in approximately 100mV increments.

A watchdog timer circuit monitors microprocessor or microcontroller activity. During normal operation, the microprocessor or microcontroller should repeatedly toggle the watchdog input (WDI) before the supervisor’s watchdog timeout period elapses to confirm that the system is executing code properly. If the microprocessor or microcontroller does not provide a valid watchdog input transition before the timeout period expires, the supervisor asserts a watchdog (active-low WDO) output to signal that the system is not executing code as expected. The watchdog output pulse can be used to reset the microprocessor or microcontroller, or it may be used to interrupt the system to warn of execution errors. The MAX16152 feature a manual reset input (active-low MR) to allow an external pushbutton or logic signal to initiate a reset pulse.

The MAX16152 are offered in a 0.86mm x 1.27mm, 6-bump WLP. All devices operate over the -40°C to +125°C temperature range.

Другие варианты исполнения

MAX16153 MAX16154 MAX16155

Модельный ряд

Классификация производителя

• Power > Voltage Supervisors, Voltage Monitors, and Sequencers