Datasheet Diodes AP64352 — Даташит

Request Datasheet
AP64352
3.8V TO 40V INPUT, 3.5A LOW IQ SYNCHRONOUS BUCK WITH INTERNAL COMPENSATION Description Pin Assignments The AP64352 is a 3.5A, synchronous buck converter with a wide input
voltage range of 3.8V to 40V. The device fully integrates a 75mΩ highside power MOSFET and a 45mΩ low-side power MOSFET to provide
high-efficiency step-down DC-DC conversion. TOP VIEW
BST 1 VIN 2 The AP64352 device is easily used by minimizing the external
component count due to its adoption of peak current mode control
along with its integrated loop compensation network.
The AP64352 design is optimized for Electromagnetic Interference
(EMI) reduction. The device has a proprietary gate driver scheme to
resist switching node ringing without sacrificing MOSFET turn-on and
turn-off times, which reduces high-frequency radiated EMI noise
caused by MOSFET switching. AP64352 also features Frequency
Spread Spectrum (FSS) with a switching frequency jitter of ±6%,
which reduces EMI by not allowing emitted energy to stay in any one
frequency for a significant period of time. 7 GND EN 3 6 SS RT/CLK 4 5 FB SO-8EP Features Typical Application Circuit VIN 3.8V to 40V
3.5A Continuous Output Current
0.8V ± 1% Reference Voltage
22µA Low Quiescent Current (Pulse Frequency Modulation)
Programmable Switching Frequency: 100kHz to 2.2MHz
External Clock Synchronization: 100kHz to 2.2MHz
Programmable Soft-Start Time
Up to 85% Efficiency at 5mA Light Load …