Datasheet Microchip AT91SAM9X25 — Даташит

ARM926EJ-S
(r0p4/r0p5) Technical Reference Manual Copyright © 2001-2003 ARM Limited. All rights reserved.
ARM DDI0198D ARM926EJ-S
Technical Reference Manual
Copyright © 2001-2003 ARM Limited. All rights reserved.
Release Information
Change history
Date Issue Change 26 September 2001 A First release 29 January 2002 B Second release 5 December 2003 C Third release. Includes r0p5 changes. Defects corrected. 26 January 2004 D Fourth release. Includes r0p4. Technically identical to previous release. Proprietary Notice
Words and logos marked with ® or ™ are registered trademarks or trademarks owned by ARM Limited, except
as otherwise stated below in this proprietary notice. Other brands and names mentioned herein may be the
trademarks of their respective owners.
Neither the whole nor any part of the information contained in, or the product described in, this document
may be adapted or reproduced in any material form except with the prior written permission of the copyright
holder.
The product described in this document is subject to continuous developments and improvements. All
particulars of the product and its use contained in this document are given by ARM in good faith. However,
all warranties implied or expressed, including but not limited to implied warranties of merchantability, or
fitness for purpose, are excluded.
This document is intended only to assist the reader in the use of the product. ARM Limited shall not be liable
for any loss or damage arising from the use of any information in this document, or any error or omission in
such information, or any incorrect use of the product.
Confidentiality Status
This document is Open Access. This document has no restriction on distribution. …

SAM9X25
Atmel | SMART ARM-based Embedded MPU
DATASHEET Description
The SAM9X25 is a member of the Atmel ® | SMART series of 400 MHz
ARM926EJ-S™ embedded microprocessor units. This MPU features multiple
networking/connectivity peripherals, optimized for industrial applications such as
building automation, gateways and medical.
The SAM9X25 features two 2.0A/B compatible Controller Area Network (CAN)
interfaces and two IEEE Std 802.3-compatible 10/100 Mbps Ethernet MACs.
Additional communication interfaces include a soft modem supporting exclusively
the Conexant SmartDAA line driver, HS USB Device and Host, FS USB Host, two
HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S, TWIs and 10-bit ADC.
To ensure uninterrupted data transfer with minimum processor overhead, the
SAM9X25 offers a 10-layer bus matrix coupled with 2 x 8 central DMA channels
and dedicated DMAs for the high-speed connectivity peripherals.
The External Bus Interface incorporates controllers for 4-bank and 8-bank
DDR2/LPDDR, SDRAM/LPSDRAM, static memories, as well as specific circuitry
for MLC/SLC NAND Flash with integrated ECC up to 24 bits.
The SAM9X25 is available in a 217-ball BGA package with 0.8 mm ball pitch. Atmel-11054F-ATARM-SAM9X25-Datasheet_31-Aug-15 Features Core
̶ ARM926EJ-S™ ARM® Thumb® Processor running at up to 400 MHz @ 1.0V +/-10%
̶ 16 Kbytes Data Cache, 16 Kbytes Instruction Cache, Memory Management Unit Memories
̶ One 64-Kbyte internal ROM embedding bootstrap routine: Boot on NAND Flash, SDCard, DataFlash or serial
DataFlash. Programmable order. …