AC-DC и DC-DC преобразователи напряжения Top Power на складе ЭЛТЕХ

Datasheet LTC2240-10 (Analog Devices) - 3

ПроизводительAnalog Devices
Описание10-Bit, 170Msps ADC
Страниц / Страница28 / 3 — CONVERTER CHARACTERISTICS The. denotes the specifi cations which apply …
Формат / Размер файлаPDF / 480 Кб
Язык документаанглийский

CONVERTER CHARACTERISTICS The. denotes the specifi cations which apply over the full operating

CONVERTER CHARACTERISTICS The denotes the specifi cations which apply over the full operating

17 предложений от 15 поставщиков
, 1-Channel Single ADC Pipelined 170Msps 10-bit Parallel/LVDS 64-Pin QFN EP T/R
EIS Components
Весь мир
LTC2240CUP-10#TRPBF
Analog Devices
1 972 ₽
AiPCBA
Весь мир
LTC2240CUP-10#TRPBF
Linear Technology
2 464 ₽
ТаймЧипс
Россия
LTC2240CUP-10-PBF
по запросу
LTC2240CUP-10#TRPBF
Linear Technology
по запросу

Модельный ряд для этого даташита

Текстовая версия документа

LTC2240-10
CONVERTER CHARACTERISTICS The
l
denotes the specifi cations which apply over the full operating temperature range, otherwise specifi cations are at TA = 25°C. (Note 4) PARAMETER CONDITIONS MIN TYP MAX UNITS
Resolution (No Missing Codes) l 10 Bits Integral Linearity Error Differential Analog Input (Note 5) l –0.8 ±0.3 0.8 LSB Differential Linearity Error Differential Analog Input l –0.6 ±0.1 0.6 LSB Offset Error (Note 6) l –15 ±5 15 mV Gain Error External Reference l –3.8 ±0.7 3.8 %FS Offset Drift ±10 μV/C Full-Scale Drift Internal Reference ±60 ppm/C External Reference ±45 ppm/C Transition Noise SENSE = 1V 0.18 LSBRMS
ANALOG INPUT The
l
denotes the specifi cations which apply over the full operating temperature range, otherwise specifi cations are at TA = 25°C. (Note 4) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
V + – IN Analog Input Range (AIN – AIN ) 2.375V < VDD < 2.625V (Note 7) l ±0.5 to ±1 V V + – IN, CM Analog Input Common Mode (AIN + AIN )/2 Differential Input (Note 7) l 1.2 1.25 1.3 V I + – IN Analog Input Leakage Current 0 < AIN , AIN < VDD l –1 1 μA ISENSE SENSE Input Leakage 0V < SENSE < 1V l –1 1 μA IMODE MODE Pin Pull-Down Current to GND 7 μA ILVDS LVDS Pin Pull-Down Current to GND 7 μA tAP Sample and Hold Acquisition Delay Time 0.4 ns tJITTER Sample and Hold Acquisition Delay Time Jitter 95 fsRMS Full Power Bandwidth Figure 8 Test Circuit 1200 MHz
DYNAMIC ACCURACY The
l
denotes the specifi cations which apply over the full operating temperature range, otherwise specifi cations are at TA = 25°C. AIN = –1dBFS. (Note 4) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
SNR Signal-to-Noise Ratio (Note 10) 10MHz Input 60.6 dB 70MHz Input l 59.7 60.6 dB 140MHz Input 60.5 dB 240MHz Input 60.5 dB SFDR Spurious Free Dynamic Range 10MHz Input 80 dB 2nd or 3rd Harmonic 70MHz Input l 65 75 dB (Note 11) 140MHz Input 74 dB 240MHz Input 72 dB Spurious Free Dynamic Range 10MHz Input 85 dB 4th Harmonic or Higher 70MHz Input l 74 85 dB (Note 11) 140MHz Input 85 dB 240MHz Input 85 dB 224010fb 3
ТМ Электроникс. Электронные компоненты и приборы. Скидки, кэшбэк и бесплатная доставка