EPC21603 – 40 V, 10 A eToF Laser Driver IC –PRELIMINARY RθJA Thermal Resistance, Junction to Ambient TBD °C/W Recommended Operating Conditions For proper operation, the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to GND unless indicated otherwise. SymbolDefinitionMin TypMax Units VLaser Input Voltage (VIN to GND) 10 30 V VDD Logic Supply Voltage 5 V Truth TableINLaser IN+ ≤ IN- Off IN+ > IN- On Electrical Characteristics All ratings at TJ = 25 ˚C. VLaser = 15 V, ID = 5 A, VIL = 0 V, VIH = 3.3 V, VDD = 5 V, RD = 100 Ω unless indicated otherwise. SymbolDefinitionMin TypMax UnitsOperating Power Supply, VDD IDD (Off) VDD Quiescent current with laser driver off 10.5 12.5 mA IDD (30 MHz) Operating current off VDD 47 58 mA Input Pins VITH+ Positive-going differential input voltage 100 mV threshold, TJ = -40 °C to 150 °C VITH- Negative-going differential input voltage -100 mV threshold, TJ = -40 °C to 150 °C RC Common-mode input resistance to 1.2 V 2.5 kΩ Power Stage RDS(on) Drain to Source Resistance 40.5 54.0 mΩ ID(peak) Peak Laser Drive Current Capability 10 A COSS VDS = 20 V 45 pF QOSS VDS = 20 V 1.4 nC EOSS VDS = 20 V 15 nJ Subject to Change without Notice www.epc-co.com COPYRIGHT 2021 Page 3
Купить EPC21603 на РадиоЛоцман.Цены — от 40 до 325 ₽
