Линейка продуктов KEEN SIDE

Datasheet ASMT-Rx45-xxxxx (Broadcom) - 8

ПроизводительBroadcom
Описание0.45mm Leadframe-Based Surface Mount ChipLED
Страниц / Страница9 / 8 — ASMT-Rx45-xxxxx. Moisture Sensitivity. Storage Before Use. Control after …
Формат / Размер файлаPDF / 511 Кб
Язык документаанглийский

ASMT-Rx45-xxxxx. Moisture Sensitivity. Storage Before Use. Control after Opening the MBB. Control for the Unfinished Reel

ASMT-Rx45-xxxxx Moisture Sensitivity Storage Before Use Control after Opening the MBB Control for the Unfinished Reel

30 предложений от 14 поставщиков
Светодиод, Желтый Зеленый, SMD (Поверхностный Монтаж), 0603, 20 мА, 2 В, 573 нм
Эиком
Россия
ASMT-RF45-AN002
Broadcom
от 18 ₽
Augswan
Весь мир
ASMT-RF45-AN002
Broadcom
по запросу
Hi-Tech Circuit Group
Весь мир
ASMT-RF45-AN002
Broadcom
по запросу
Кремний
Россия и страны СНГ
ASMT-RF45-AN002
Avago Technologies
по запросу
SiC-компоненты от ведущих китайских производителей

Модельный ряд для этого даташита

Текстовая версия документа

ASMT-Rx45-xxxxx
Data Sheet 0.45-mm Leadframe-Based Surface Mount ChipLED
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a per JEDEC J-STD-020. Take precautions when handling this moisture sensitive product to ensure the reliability of the product. Refer to Broadcom Application Note AN5305, Handling of Moisture Sensitive Surface Mount Devices for details.
Storage Before Use
An unopen moisture barrier bag (MBB) can be stored at < 40°C/90% RH for 12 months. If the actual shelf life has exceeded 12 months and the humidity indicator card (HIC) indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. Do not open the MBB prior to assembly (for example, for IQC).
Control after Opening the MBB
Read the HIC when opening the MBB. Keep the LEDs at < 30°C/60% RH at all times and for all high-temperature related processes, including soldering, curing, or rework that must be completed within 672 hours.
Control for the Unfinished Reel
Store unused LEDs in a sealed MBB with desiccant or desiccator at < 5%RH.
Control of Assembled Boards
If the PCB soldered with the LEDs is to be subjected to other high-temperature processes, store the PCB in a sealed MBB with desiccant or desiccator at <5% RH to ensure that no LEDs have exceeded their floor life of 672 hours.
Baking Is Required for the Following Conditions
"10%" or "15%" on the HIC turns pink. The LEDs are exposed to conditions of > 30°C/60% RH at any time. The LEDs’ floor life exceeded 672 hours. The recommended baking condition is 60°C ± 5°C for 20 hours. Broadcom AV02-0378EN 8 Document Outline Description Features Applications Package Dimensions Device Selection Guide Part Numbering System Absolute Maximum Ratings at TA = 25°C Electrical Characteristics at TA = 25°C Optical Characteristics at TA = 25°C Intensity Bin Select (X3X4) Light Intensity (IV) Bin Limits Color Bin Select (X5) Packaging Option (X6) Forward Voltage (VF) Bin Limits Color Bin Limits Yellow Green Color Bin Yellow/Amber Color Bin Orange Color Bin Red Color Bin Red Orange Color Bin Moisture Sensitivity
ТМ Электроникс. Электронные компоненты и приборы. Скидки, кэшбэк и бесплатная доставка