Datasheet 6N135, 6N136 (Vishay) - 3

6N135, 6N136
www.vishay.com Vishay Semiconductors
CURRENT TRANSFER RATIO
(Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
6N135 CTR 7 16 - % IF = 16 mA, VO = 0.4 V, VCC = 4.5 V Current transfer 6N136 CTR 19 35 - % ratio 6N135 CTR 5 - - % IF = 16 mA, VO = 0.5 V, VCC = 4.5 V 6N136 CTR 15 - - %
SWITCHING CHARACTERISTICS
(Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ 6N135 tPHL - 0.3 1.5 μs High to low IF = 16 mA, VCC = 5 V, RL = 1.9 kΩ 6N136 tPHL - 0.2 0.8 μs IF = 16 mA, VCC = 5 V, RL = 4.1 kΩ 6N135 tPLH - 0.3 1.5 μs Low to high IF = 16 mA, VCC = 5 V, RL = 1.9 kΩ 6N136 tPLH - 0.2 0.8 μs
COMMON MODE TRANSIENT IMMUNITY
(Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IF = 0 mA, VCM = 10 VP-P, VCC = 5 V, RL = 4.1 kΩ 6N135 |CMH| - 1000 - V/μs High IF = 0 mA, VCM = 10 VP-P, VCC = 5 V, RL = 1.9 kΩ 6N136 |CMH| - 1000 - V/μs IF = 16 mA, VCM = 10 VP-P, VCC = 5 V, RL = 4.1 kΩ 6N135 |CML| - 1000 - V/μs Low IF = 16 mA, VCM = 10 VP-P, VCC = 5 V, RL = 1.9 kΩ 6N136 |CML| - 1000 - V/μs
SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Climatic classification According to IEC 68 part 1 55 / 100 / 21 Pollution degree According to DIN VDE 0109 2 Comparative tracking index Insulation group IIIa CTI 175 Maximum rated withstanding isolation voltage According to UL1577, t = 1 min VISO 5300 VRMS Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 8000 Vpeak Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 Vpeak Tamb = 25 °C, VIO = 500 V RIO ≥ 1012 Ω Isolation resistance Tamb = 100 °C, VIO = 500 V RIO ≥ 1011 Ω Output safety power PSO 500 mW Input safety current ISI 300 mA Input safety temperature TS 175 °C Creepage distance DIP-8 ≥ 7 mm Clearance distance DIP-8 ≥ 7 mm Creepage distance DIP-8, 400 mil, option 6 ≥ 8 mm Clearance distance DIP-8, 400 mil, option 6 ≥ 8 mm Creepage distance SMD-8, option 7 ≥ 8 mm Clearance distance SMD-8, option 7 ≥ 8 mm Creepage distance SMD-8, option 9 ≥ 8 mm Clearance distance SMD-8, option 9 ≥ 8 mm Insulation thickness DTI ≥ 0.4 mm
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Rev. 1.9, 02-Nov-15
3
Document Number: 83604 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000