VIA0050DD www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETERSYMBOLVALUEUNIT Power supply voltage VDD1, VDD2 -0.3 to 6.5 V Input voltage INP, INN GND1-6 to VDD1+0.5 V Output voltage OUTP, OUTN GND2-0.5 to VDD2+0.5 V Output current per output pin IO -10 to +10 mA Operating temperature Tamb -40 to +125 °C Junction temperature Tj -40 to +150 °C Storage temperature Tstg -55 to +150 °C HBM (1) ± 2000 V Electrostatic discharge CDM (2) ± 1000 V Notes (1) Human body model (HBM), per AEC-Q100-002-RevD (2) Charged device model (CDM), per AEC-Q100-011-RevB FUNCTIONAL BLOCK DIAGRAM V V DD1 DD2 V detection DD1 Reference Reference INP Retiming and 4th - OUTP Σ-Δ modulator TX RX order active low pass OUTN filter INN Isolation Barrier RX TX Oscillator V detection CM GND GND 1 2 Fig. 1 - VIA0050DD Block Diagram RECOMMENDED OPERATING CONDITIONS (Tamb = 25 °C, unless otherwise specified) PARAMETERSYMBOLMIN.TYP.MAX.UNIT Side 1 power supply VDD1 3.0 5.0 5.5 V Side 2 power supply VDD2 3.0 3.3 5.5 V Differential input voltage V 64 - mV before clipping output clipping - ± Linear differential input full VIA0050DD V scale voltage FSR -50 - +50 mV Operating common-mode V input voltage CM -0.032 - 0.8 V Operating ambient temperature Tamb -40 - +125 °C Rev. 1.2, 02-Apr-2025 2 Document Number: 80900 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
