During CCM, current always flows through the inductor. Q1 or D2 supplies this current during the flyback event that Q1's turn-off causes

Авторы	Justin Larson, Frank Kolanko
Основной документ	Article «Buck regulator handles light loads»
Описание	Figure 2
Формат / Размер файла	PDF / 19 Кб
Язык документа	английский

Другие материалы из основного документа

Figure 1. Many buck-controller ICs use a floating-gate driver
Figure 2. During CCM, current always flows through the inductor. Q1 or D2 supplies this current during the flyback event that Q1's turn-off causes
Figure 3. The CBOOST capacitor discharges when the regulator goes into DCM