Datasheet Diodes AL8843Q — Даташит


Automotive Compliant 40V 3A Step-Down LED Driver


Datasheet AL8843Q
PDF, 1.2 Мб, Язык: анг., Файл закачен: 20 дек 2019, Страниц: 18
Automotive Compliant 40V 3A Step-Down LED Driver
Выписка из документа


Подробное описание

The AL8843Q is a hysteresis mode DC-DC step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.

The device can operate from an input supply between 4.5V and 40V and provide an externally adjustable output current up to 3A. Depending upon supply voltage and external components, this converter can provide up to 60W of output power.

The AL8843Q integrates the power switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.

Dimming can be realized by applying an external control signal to the CTRL pin. The CTRL pin will accept either a DC voltage signal or a PWM signal.

The soft-start time can be adjusted by an external capacitor from the CTRL pin to Ground. Applying a voltage of 0.3V or lower to the CTRL pin will shut down the power switch.

The AL8843Q is available in the thermally enhanced SO-8EP package and automotive compliant, qualified to AEC-Q100 Grade 1, supports PPAP documentations.

Корпус / Упаковка / Маркировка



Parameters / ModelsAL8843QSP-13
AEC-Q100 Grade1
Automotive Compliant PPAPYes
Dimming (Analog)Yes
Dimming (PWM)Yes
Efficiency98 %
LED Current Accuracy4 %
Maximum Input Voltage40 V
Maximum LED Current3 A
Maximum Output Voltage36 V
Minimum Input Voltage4.5 V
Рабочий диапазон температур, °Cот -40 до 125 °
Qualified to AECQ10xYes
Sense Voltage100 mV
Switching Frequency Maximum1000 kHz
Topologies (Boost)No
Topologies (Buck)Yes
Topologies (Buck-Boost)No

Модельный ряд

Серия: AL8843Q (1)

Классификация производителя

На английском языке: Datasheet Diodes AL8843Q

JLCPCP: 2USD 2Layer 5PCBs, 5USD 4Layer 5PCBs